Microstructure and wear resistance of TiN-NiCrBSi laser clad layer on titanium alloy surface

被引：0
|
作者：
Sun, Ronglu [1 ,2 ]
Niu, Wei [1 ]
Wang, Chengyang [2 ]
机构：
[1] Tianjin Polytechnic University, Tianjin 300160, China
[2] Tianjin University, Tianjin 300072, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2007年 / 36卷 / 01期
关键词：
Eutectics - Laser cladding - Microhardness - Microstructure - Scanning electron microscopy - Titanium alloys - Titanium nitride - Transmission electron microscopy - Wear resistance - X ray diffraction analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ni based clad layer reinforced with TiN particles was prepared on the surface of TC4 alloy adpting laser cladding process, using the mixed powder of TiN powder and NiCrBSi powder as starting material. The microstructure of the laser clad layer was characterized by XRD, SEM and TEM. The microhardness and wear resistance of the laser clad layer were examined. The results show that the laser clad layer is divided into two zones: the clad and dilution zones. In the clad zone, TiN particles and M23C6 are distributed in matrix of the γ-Ni dendrites and the eutectics consisting of γ-Ni and Ni3B, and the microhardness is 9000 MPa-12000 MPa. The dilution zone is a mixture of Ti-6Al-4V alloy and Ni-base alloy, and presents a microstructure of dendrites and cells. The clad layer is reinforced by particles, solution, and grain-refining, resulting in a remarkable increase in wear resistance comparing with Ti-6A1-4V alloy.
引用
收藏
页码：7 / 10
相关论文
共 50 条
  • [11] Microstructure and wear resistance of laser clad cobalt-based alloy multi-layer coatings
    Li, MX
    He, YZ
    Sun, GX
    APPLIED SURFACE SCIENCE, 2004, 230 (1-4) : 201 - 206
  • [12] Microstructure and wear behaviour of laser clad NiCrBSi plus Ta composite coating
    Yu, T.
    Deng, Q. L.
    Zheng, J. F.
    Dong, G.
    Yang, J. G.
    SURFACE ENGINEERING, 2012, 28 (05) : 357 - 363
  • [13] Study on microstructure of laser remelted NiCrBSi+TiN coatings on surface of tianium alloy
    Guo, Li-Xin
    Liu, Rong-Xiang
    Wang, Ya-Ming
    Zhou, Yu
    Lei, Ting-Quan
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2009, 30 (02): : 134 - 137
  • [14] Crack resistance and wear resistance of laser clad layer on the surface of cast iron
    Luan, Jing-Fei
    Yan, Mi
    Zhou, Zhen-Feng
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2003, 17 (02): : 173 - 179
  • [15] Microscopic morphology and microstructure of phases between dilution zone and clad zone in laser remelting NiCrBSi/TiN layer
    College of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150080, China
    Zhongguo Jiguang, 2007, 9 (1292-1296): : 1292 - 1296
  • [16] Wear behaviour of laser clad NiCrBSi coating
    Fernández, E
    Cadenas, M
    González, R
    Navas, C
    Fernández, R
    de Damborenea, J
    WEAR, 2005, 259 : 870 - 875
  • [17] Microstructure and Wear Resistance of Laser Clad CoCrFeNiTiNbBx High Entropy Alloy Coatings
    Lin Ding
    Hongxin Wang
    Journal of Thermal Spray Technology, 2021, 30 : 2187 - 2196
  • [18] Microstructure and Wear Resistance of Laser Clad CoCrFeNiTiNbBx High Entropy Alloy Coatings
    Ding, Lin
    Wang, Hongxin
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2021, 30 (08) : 2187 - 2196
  • [19] Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing
    Soboleva, N. N.
    Makarov, A., V
    Malygina, I. Yu
    Savrai, R. A.
    MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2016), 2016, 1785
  • [20] Microstructure and wear performance of laser clad surface TiC/Ti composite on Ti alloy
    Inst of Corrosion and Protection of, Metals, Chinese Acad of Sciences, Shenyang, China
    Mocaxue Xuebao, 1 (18-22):
12345