Microstructure and hardness of adiabatic shear bands formed during orthogonal cutting of high strength steel

被引：0

作者：

Duan, Chun-Zheng ^{[1
]}

Wang, Min-Jie ^{[1
]}

机构：

[1] Lab. of Non-Traditional Machining, Sch. of Mech. Eng., Dalian Univ. of Technol., Dalian 116024, China

来源：

Cailiao Kexue yu Gongyi/Material Science and Technology | 2004年 / 12卷 / 06期

关键词：

Deformation - Metal cutting - Microhardness - Microstructure - Shearing;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

To study the influence of cutting speed and workpiece hardness on the microstructure and microhardness of the adiabatic shear bands, microstructure observation and microhardness measurement were performed on the adiabatic shear bands in the sawtooth chips formed during orthogonal cutting of two tempering hardness of 30CrNi3MoV high strength steel under different cutting speeds by optical microscope, SEM, TEM and microhardness tester. Results show that two types of adiabatic shear bands, i.e., deformed band with heavy elongated microstructure and transformed band with fine grains, are formed as cutting speed increases. The increase of the workpiece hardness promotes the formation of the transformed band. The increases of the cutting speed and workpiece hardness have little influence on the microhardness values in the transformed bands, but rapidly raise hardness in the deformed bands.

引用

页码：602 / 605

共 50 条

[31] Study on Chip Morphology and Adiabatic Shear in High Speed Cutting of Alloy Steels with Different Hardness
Duan, Chunzheng
Li, Honghua
Wang, Minjie
Cai, Yujun
ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 875 - +
[32] Prediction of Critical Cutting Conditions of Adiabatic Shear in Orthogonal High Speed Cutting Based on Linear Pertubation Analysis
Li, G. H.
Wang, M. J.
Cai, Y. J.
MANUFACTURING AUTOMATION TECHNOLOGY DEVELOPMENT, 2011, 455 : 137 - +
[33] Microscopical study of the formation of adiabatic shear bands in 4340 steel during dynamic loading
Boakye-Yiadom, Solomon
Bassim, Nabil
Khan, Abdul Khaliq
PHILOSOPHICAL MAGAZINE, 2013, 93 (36) : 4544 - 4568
[34] Characteristics of shear bands formed in an austenitic stainless steel during hot deformation
Cizek, P
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 324 (1-2): : 214 - 218
[35] OBSERVATION OF ADIABATIC SHEAR BANDS AT VERY HIGH STRAIN RATES IN A HSLA STEEL.
Tirupataiah, Y.
Raju, K.R.
Transactions of the Indian Institute of Metals, 1982, 35 (03): : 212 - 215
[36] OBSERVATION OF ADIABATIC SHEAR BANDS AT VERY HIGH-STRAIN RATES IN A HSLA STEEL
TIRUPATAIAH, Y
RAJU, KR
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1982, 35 (03) : 212 - +
[37] The formation of adiabatic shear bands in copper during torsion at high strain rates
Yazdani, F.
Bassim, M. N.
Odeshi, A. G.
MESOMECHANICS 2009, 2009, 1 (01): : 225 - 228
[38] Analytical Modeling to Predict Adiabatic Shear Critical Condition for Orthogonal Cutting
Yang, Qibiao
Liu, Zhanqiang
Shi, Zhenyu
HIGH SPEED MACHINING V, 2012, 723 : 41 - 49
[39] A microstructural investigation of adiabatic shear bands in an interstitial free steel
Lins, J. F. C.
Sandim, H. R. Z.
Kestenbach, Ha.
Raabe, D.
Vecchio, K. S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 457 (1-2): : 205 - 218
[40] Microstructure Characteristic of Adiabatic Shear Bands for Aluminum Matrix Composites Compressed With High Strain Rates
Zheng, Z. X.
Zhu, D. Z.
Liang, P.
2016 INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY, ENVIRONMENT AND INFORMATION ENGINEERING (SEEIE 2016), 2016, : 616 - 621

← 1 2 3 4 5 →