A test method for characterizing clear wood using a single specimen

被引：0

作者：

Majano-Majano, A. ^{[1
]}

Fernandez-Cabo, J.L. ^{[1
]}

Hoheisel, S. ^{[2
]}

Klein, M. ^{[3
]}

机构：

[1] ETS of Architecture, Structural Department, Technical University of Madrid (UPM), Avda. Juan de Herrera, 4, 28040, Madrid, Spain

[2] Dipl. Ing. Metronic S. A., Calle Barrena 42-44, 20600 Eibar, Guipúzcoa, Spain

[3] Dipl. Ing. Gesellschaft für Optische Messtechnik mbH, Mittelweg 7-8, 38106 Braunschweig, Germany

来源：

Proceedings of the Society for Experimental Mechanics, Inc. | 2012年 / 52卷 / 07期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：1079 / 1096

共 50 条

[21] Numerical verification of a biaxial tensile test method using a cruciform specimen
Hanabusa, Yasuhiro
Takizawa, Hideo
Kuwabara, Toshihiko
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (06) : 961 - 970
[22] A RAPID METHOD FOR CHARACTERIZING DECAY IN WOOD CHIPS
HARRIS, G
KARNIS, A
PULP & PAPER-CANADA, 1988, 89 (04) : 59 - 66
[23] J-integral evaluation in cracked wood specimen using the mark tracking method
Octavian Pop
Frédéric Dubois
Joseph Absi
Wood Science and Technology, 2013, 47 : 257 - 267
[24] J-integral evaluation in cracked wood specimen using the mark tracking method
Pop, Octavian
Dubois, Frederic
Absi, Joseph
WOOD SCIENCE AND TECHNOLOGY, 2013, 47 (02) : 257 - 267
[25] Simplified method for constructing a J(R)-curve from results for a single test specimen
Smirnov, VI
INDUSTRIAL LABORATORY, 1995, 61 (07): : 410 - 413
[26] SINGLE SPECIMEN TEST METHOD FOR DETERMINING FRACTURE ENERGY (JC) OF HIGHLY DEFORMABLE MATERIALS
KIM, BH
JOE, CR
ENGINEERING FRACTURE MECHANICS, 1989, 32 (01) : 155 - 161
[27] The Best Width of Wood Specimen for Zero-span Tension Test
HUANG Yanhui1 FEI Benhua1 ZHAO Rongjun2 ZHANG Shuqin1 1.Beijing Research Institute of Forestry Machine
Chinese Forestry Science and Technology, 2008, (02) : 29 - 32
[28] MODE-II WOOD TEST SPECIMEN - BEAM WITH CENTER SLIT
MURPHY, JF
JOURNAL OF TESTING AND EVALUATION, 1988, 16 (04) : 364 - 368
[29] Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen
Yoshihara, Hiroshi
ENGINEERING FRACTURE MECHANICS, 2008, 75 (16) : 4727 - 4739
[30] RAPID METHOD FOR CHARACTERIZING DECAY IN WOOD CHIPS.
Harris, G.
Karnis, A.
Pulp and Paper Canada, 1988, 89 (04): : 59 - 66

← 1 2 3 4 5 →