Effect of alumina addition on the isothermal martensite in zirconia-yttria ceramics by an atomic force microscopy

被引：0

作者：

Tsubakino, Harushige ^{[1
]}

Kuroda, Yoshihide ^{[1
]}

Tanaka, Norihito ^{[1
]}

Niibe, Masato ^{[1
]}

机构：

[1] Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji 671-2201, Japan

来源：

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2001年 / 48卷 / 10期

关键词：

Addition reactions - Aging of materials - Alumina - Atomic force microscopy - Composition effects - Grain boundaries - Martensite - Martensitic transformations;

D O I：

10.2497/jjspm.48.902

中图分类号：

学科分类号：

摘要：

Surface relief associated with isothermal tetragonal-to-monoclinic phase transformation, i.e., martensitic transformation, in zirconia-3mol yttria (PSZ) with and without alumina addition, which occurred during aging at 130° and 200°C in air or vacuum environment was observed by an atomic force microscopy. The surface relief occurred from grain boundaries into grain interiors as the aging time increased and then spread successively into the surrounding grains with further aging. However, alumina particles and cubic phase particles in PSZ containing alumina acted as obstacles for the advance of transformation, which would be the major reason for the improved mechanical properties of PSZ by the addition of alumina.

引用

页码：902 / 906

共 50 条

[41] Particle atomic layer deposition of alumina for sintering yttria-stabilized cubic zirconia
O'Toole, Rebecca J.
Bartel, Christopher J.
Kodas, Maila U.
Horrell, Alexa J.
Ricote, Sandrine
Sullivan, Neal P.
Gump, Christopher J.
Musgrave, Charles B.
Weimer, Alan W.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2019, 102 (05) : 2283 - 2293
[42] Isothermal and adiabatic Young's moduli of alumina and zirconia ceramics at elevated temperatures
Pabst, Willi
Gregorova, Eva
Cerny, Martin
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (15-16) : 3085 - 3093
[43] Effect of alumina additions on the electrical properties of yttria-doped zirconia
1600, Electrochemical Soc Inc, Manchester, NH, USA (89):
[44] Noise and Electrical Oscillations Generation during the Investigation of the Resistive Switching in the Yttria Stabilized Zirconia Films by Conductive Atomic Force Microscopy
Gorshkov, Oleg
Filatov, Dmitry
Antonov, Dmitry
Antonov, Ivan
ADVANCES IN CONDENSED MATTER PHYSICS, 2015, 2015
[45] EFFECT OF CHEMICALLY ADDED ZIRCONIA AND YTTRIA ON THE MECHANICAL-PROPERTIES OF ZIRCONIA-DISPERSED ALUMINA
RANJBAR, K
RAO, BT
MOHAN, TRR
HARENDRANATH, CS
AMERICAN CERAMIC SOCIETY BULLETIN, 1994, 73 (02): : 63 - 66
[46] Synthesis of Alumina-Zirconia-Yttria Ceramics and Correlation of Mechanical Properties with Phase Formation and Microstructure
Suekwamsue, Narawut
Rittidech, Aurawan
FERROELECTRICS, 2013, 455 (01) : 97 - 103
[47] Topographic characterization of zirconia-based ceramics by atomic force microscopy: A case study on different laser irradiations
Fattahi M.
Nezafat N.B.
Talu
Solaymani S.
Ghoranneviss M.
Elahi S.M.
Shafiekhani A.
Rezaee S.
Elahi, Seyed Mohammad (smohammad_elahi@srbiau.ac.ir), 1600, Elsevier Ltd (831):
[48] Topographic characterization of zirconia-based ceramics by atomic force microscopy: A case study on different laser irradiations
Fattahi, Mehdi
Nezafat, Negin Beryani
Talu, Stefan
Solaymani, Shahram
Ghoranneviss, Mahmood
Elahi, Seyed Mohammad
Shafiekhani, Azizollah
Rezaee, Sahar
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 831
[49] EFFECT OF ALUMINA ADDITION ON MECHANICAL BEHAVIOR AND FRACTURE PROPERTIES OF ALL-CERAMICS ZIRCONIA DENTAL MATERIALS
Zhang, Dongjiao
Song, Dawei
Liao, Yunmao
Chen, Xinmin
Wang, Min
JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 2014, 14 (02)
[50] Thermophysical Properties of Zirconia Toughened Alumina Ceramics with Boron Nitride Nanotubes Addition
Heon Kim, Chi
Go, Eun Byul
Tae Kim, Hyo
HEAT TRANSFER ENGINEERING, 2020, 41 (15-16) : 1354 - 1364

← 1 2 3 4 5 →