Effect of alumina addition on the isothermal martensite in zirconia-yttria ceramics by an atomic force microscopy

被引：0
|
作者：
Tsubakino, Harushige [1 ]
Kuroda, Yoshihide [1 ]
Tanaka, Norihito [1 ]
Niibe, Masato [1 ]
机构：
[1] Faculty of Engineering, Himeji Institute of Technology, 2167 Shosha, Himeji 671-2201, Japan
来源：
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2001年 / 48卷 / 10期
关键词：
Addition reactions - Aging of materials - Alumina - Atomic force microscopy - Composition effects - Grain boundaries - Martensite - Martensitic transformations;
D O I：
10.2497/jjspm.48.902
中图分类号：
学科分类号：
摘要：
Surface relief associated with isothermal tetragonal-to-monoclinic phase transformation, i.e., martensitic transformation, in zirconia-3mol yttria (PSZ) with and without alumina addition, which occurred during aging at 130° and 200°C in air or vacuum environment was observed by an atomic force microscopy. The surface relief occurred from grain boundaries into grain interiors as the aging time increased and then spread successively into the surrounding grains with further aging. However, alumina particles and cubic phase particles in PSZ containing alumina acted as obstacles for the advance of transformation, which would be the major reason for the improved mechanical properties of PSZ by the addition of alumina.
引用
收藏
页码：902 / 906
相关论文
共 50 条
  • [1] Surface relief associated with isothermal martensite in zirconia-3-mol%-yttria ceramics observed by atomic force microscopy
    Dept. of Mat. Sci. and Engineering, Faculty of Engineering, Himeji Institute of Technology, Hyogo 671-2201, Japan
    J Am Ceram Soc, 10 (2921-2923):
  • [2] Surface relief associated with isothermal martensite in zirconia-3-mol%-yttria ceramics observed by atomic force microscopy
    Tsubakino, H
    Kuroda, Y
    Niibe, M
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (10) : 2921 - 2923
  • [3] Tetragonal-to-monoclinic phase transformation in zirconia-yttria ceramics with and without alumina addition
    Tsubakino, H
    Tanaka, T
    Tanaka, N
    Inoue, H
    HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES 5, 2005, : 359 - 364
  • [4] Effect of alumina addition on T-M transformation in zirconia-yttria system
    Tanaka, Takaaki
    Inoue, Tomohiro
    Inoue, Hirofumi
    Tsubakino, Harushige
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2004, 51 (09): : 641 - 645
  • [5] TRIBOLOGICAL CHARACTERISTICS OF ZIRCONIA-YTTRIA CERAMICS
    AMIN, KE
    NAG, D
    AMERICAN CERAMIC SOCIETY BULLETIN, 1995, 74 (05): : 80 - 84
  • [6] AFM study of martensite formed isothermally in zirconia-yttria system
    Tsubakino, H
    Kuroda, Y
    Niibe, M
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 915 - 918
  • [7] Isothermal T-to-M transformation nucleated at grain boundaries in zirconia-yttria ceramics
    Tsubakino, H
    Matsuura, N
    Kuroda, Y
    GRAIN BOUNDARY ENGINEERING IN CERAMICS - FROM GRAIN BOUNDARY PHENOMENA TO GRAIN BOUNDARY QUANTUM STRUCTURES, 2000, 118 : 163 - 171
  • [8] Isothermal and athermal martensitic transformations in a zirconia-yttria alloy
    Tottori Univ, Tottori, Japan
    Mater Sci Eng A Struct Mater Prop Microstruct Process, (213-217):
  • [9] Isothermal and athermal martensitic transformations in a zirconia-yttria alloy
    Hayakawa, M
    Nishio, K
    Hamakita, J
    Onda, T
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 273 : 213 - 217
  • [10] Sintering of zirconia-yttria ceramics studied by impedance spectroscopy
    de Florio, DZ
    Muccillo, R
    SOLID STATE IONICS, 1999, 123 (1-4) : 301 - 305
12345