Study of the casting mold filling upon billet casting of uranium

被引：0
|
作者：
Belov, R.G. [1 ]
机构：
[1] VNIINM, Moscow, Russia
来源：
| 2002年 / Mashinostroeni卷
关键词：
Alloying elements - Billets (metal bars) - Calculations - Filling - Gating and feeding - Impurities - Ingot molds - Specimen preparation - Standardization - Uranium;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A procedure for computing a pouring head system is created and examined experimentally. It enables to determine the parameters of system for simultaneous filling the ingot and specimen-companion. The pouring head system with the adequate filling the said molds makes it possible certification of uranium ingots with the help of specimens-companions. The statistical insignificance of divergences in the computed and experimental values of content of the alloying and impurity components in the ingots and in all zones of specimens-companions is noted.
引用
收藏
相关论文
共 50 条
  • [11] Mold filling velocity during investment casting
    Li, Feng-Jun
    Shen, Hou-Fa
    Liu, Bai-Cheng
    Zhang, Dian-De
    Cailiao Kexue yu Gongyi/Material Science and Technology, 2003, 11 (03): : 225 - 229
  • [12] Cyclic casting simulations: Is mold filling necessary?
    Backer, GP
    Kim, CW
    ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, : 79 - 84
  • [13] THE INFLUENCE OF CASTING PRACTICE ON HEAT EXTRACTION AND EARLY SOLIDIFICATION IN A CONTINUOUS-CASTING BILLET MOLD
    SAMARASEKERA, IV
    BRIMACOMBE, JK
    CIM BULLETIN, 1984, 77 (866): : 45 - 45
  • [14] CURVED MOLD BILLET CASTING AT ARMCO SAND SPRINGS WORKS
    BURCHAM, WJ
    BLAST FURNACE AND STEEL PLANT, 1966, 54 (04): : 319 - &
  • [15] The analysis of molten steel flow in billet continuous casting mold
    Ho, YH
    Hwang, WS
    ISIJ INTERNATIONAL, 1996, 36 (08) : 1030 - 1035
  • [16] On the friction forces between billet and mold on continuous casting of steel
    Brovman, M.Ya.
    Metally, 2003, (06): : 21 - 29
  • [17] Application of mold electromagnetic stirring in continuous casting of middle billet
    Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China
    不详
    不详
    Beijing Keji Daxue Xuebao, 2007, SUPPL. 1 (142-145):
  • [18] ROUND BILLET CASTING PROCESS .10. MOLD DEFORMATION AND MOLD MEASURING SYSTEM OF ROUND BILLET CASTER
    YAMAMOTO, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1014 - 1014
  • [19] Study on mold filling process of casting with rapid data acquisition system
    Xu, Qingyan
    Zhang, Guangyue
    Li, Fengjun
    Xiong, Shoumei
    Liu, Baicheng
    Zhang, Diande
    2000, J Off Spec Casting Nonferrous Alloys, China
  • [20] STUDY ON EFFICIENT NUMERICAL SIMULATION TECHNOLOGY OF MOLD FILLING PROCESS OF CASTING
    Yang, Liushuan
    Wang, Xiao
    Huang, Jinliang
    Zhang, Shaoli
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1603 - 1608
12345