Fabrication of TiN and TiCN coatings by microwave irradiation

被引：0
|
作者：
Miyashita K. [1 ]
Hayashi Y. [1 ]
Takizawa H. [1 ]
机构：
[1] Graduate School of Engineering, Tohoku University, Aoba-ku, Sendai 980-8579, 6-6-07 Aramaki, Aza-aoba
来源：
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2010年 / 57卷 / 12期
关键词：
Ceramics coating; Hardness; Microwave processing; TiCN; TiN;
D O I：
10.2497/jjspm.57.753
中图分类号：
学科分类号：
摘要：
TiN coating was successfully formed by burying a quartz glass substrate into Ti powder and subsequent microwave irradiation in air. The temperature of the powder rapidly rose up to 1100°C by microwave irradiation, and TiN coating was formed on the substrate by vapor phase reaction. Particle size, film thickness, and Vicker's hardness of the coating increased with increasing the irradiation time and microwave power. Similar technique was also applied to form TiCN coating by using mixture of Ti and carbon powder instead of Ti powder. It was revealed that the carbon content, film thickness, and Vicker's hardness of the coating increased with increasing the carbon content in the starting powder.
引用
收藏
页码：753 / 757
页数：4
相关论文
共 50 条
  • [21] Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films
    Lyu, Yanhong
    Zhang, Qiaoyu
    Liu, Yang
    Deng, Xinrong
    Sun, Huilian
    Mo, Min
    LUBRICANTS, 2023, 11 (01)
  • [22] Fabrication and performance of TiN/TiAlN nanometer modulated coatings
    Liang, Chang-Lin
    Cheng, Guo-An
    Zheng, Rui-Ting
    Liu, Hua-Ping
    THIN SOLID FILMS, 2011, 520 (02) : 813 - 817
  • [23] Fabrication of TiN coatings using mechanical milling techniques
    Romankov, S.
    Komarov, S. V.
    Vdovichenko, E.
    Hayasaka, Y.
    Hayashi, N.
    Kaloshkin, S. D.
    Kasai, E.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (02): : 492 - 497
  • [24] Preparation of siloxane coatings under microwave irradiation
    Vasnev, V. A.
    Izmaylov, B. A.
    Istratov, V. V.
    Markova, G. D.
    Baranov, O. V.
    RUSSIAN CHEMICAL BULLETIN, 2021, 70 (08) : 1471 - 1473
  • [25] Preparation of siloxane coatings under microwave irradiation
    V. A. Vasnev
    B. A. Izmaylov
    V. V. Istratov
    G. D. Markova
    O. V. Baranov
    Russian Chemical Bulletin, 2021, 70 : 1471 - 1473
  • [26] Effect of High-Current Pulsed Electron Beam Irradiation on the Microstructure and Mechanical Properties of Multilayered TiN/TiCN/Al2O3 Coatings
    Tian, Nana
    Zhou, Shiyu
    Zhang, Conglin
    Cao, Fuyang
    Guan, Jintong
    Chen, Xiangming
    Guan, Qingfeng
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (20) : 10726 - 10735
  • [27] TiN/TiCN/AlO/TiN与TiN/TiCN/AlO/TiCNO多层涂层的组织性能比较
    沈同威
    朱丽慧
    表面技术, 2020, (07) : 141 - 148
  • [28] Influence of Holding Time on Structure, Residual Stress and Wear Resistance of Ti/TiN/TiCN Composite Coatings
    Li H.-T.
    Cheng D.-H.
    Shi C.
    Zhang T.-M.
    Chen Y.
    Surface Technology, 2022, 51 (07): : 141 - 149
  • [29] Synthesis and characterization of TiC and TiCN coatings
    R. Bahl
    A. Kumar
    M. Vedawyas
    D. Patel
    Applied Physics A, 1999, 69 : S643 - S646
  • [30] Characterisation of TiCN Coatings for Biomedical Applications
    Madej, Monika
    Piotrowska, Katarzyna
    COATINGS, 2024, 14 (06)
12345