Preparation and Properties of Shape Memory Hydrogenated Bisphenol A Epoxy Resin

被引：0
|
作者：
Zhou X. [1 ]
Ma B. [2 ]
Wei K. [2 ]
Bo Y. [2 ]
机构：
[1] School of Modern Posts & Institute of Posts, Xi'an University of Posts & Telecommunications, Xi'an
[2] School of Highway, Chang'an University, Xi'an
来源：
| 2018年 / Cailiao Daobaoshe/ Materials Review卷 / 32期
关键词：
Glass transition temperature; Hydrogenated bisphenol A epoxy resin; Shape memory property; Storage modulus;
D O I：
10.11896/j.issn.1005-023X.2018.18.031
中图分类号：
学科分类号：
摘要：
In order to study the effect of polypropylene glycol diglycidyl ether (JH-230) on the basic properties of thermosetting shape memory epoxy resin, a novel shape memory hydrogenated bisphenol A epoxy resin was prepared by the hydrogenated bisphenol A epoxy resin (AL-3040), polypropylene glycol diglycidyl ether (JH-230) and isophorone diamine (IPDA) with different molar ratios between the AL-3040 and the JH-230. The molecular structures of the thermosetting shape memory epoxy resin were mea-sured by the flourier transform infrared spectroscopy (FT-IR), the glass-transition temperature (T g ) of the epoxy resin was studied by the differential scanning calorimetry (DSC), and the corresponding storage modulus and shape memory property were observed by the dynamic thermomechanical analyzer (DMA) and tensile-recovery shape memory test. Results showed that the flexibility of the epoxy resin increased and the T g of the epoxy resin decreased with increased JH-230 content. The storage modulus of the epoxy resin decreased and the complete recovery time of the epoxy resin extended with increased JH-230 content. It was suggested that the flexibility, T g and storage modulus of epoxy resin can be controlled by adjusting the JH-230 content, and the shape memory hydrogenated bisphenol A epoxy resin has good shape memory property. © 2018, Materials Review Magazine. All right reserved.
引用
收藏
页码：3271 / 3275
页数：4
相关论文
共 16 条
  • [1] Florence P., Antoniya T., Philippe D., Et al., Shape-memory polymers for multiple applications in the materials world, European Polymer Journal, 80, (2016)
  • [2] Wang F.F., Zhang R.C., Lin A.X., Et al., Molecular origin of the shape memory properties of heat-shrink crosslinked polymers as revealed by solid-state NMR, Polymer, 107, (2016)
  • [3] Sayyeda M.H., Alexandra D.E., Monroe M.B., Et al., Development of siloxane-based amphiphiles as cell stabilizers for porous shape memory polymer systems, Journal of Colloid and Interface Science, 478, (2016)
  • [4] Janice J.S., Huntley H.C., Hani E.N., Biocompatible shape memory polymer actuators with high force capabilities, European Polymer Journal, 67, (2015)
  • [5] Zhao J.B., Wu X.L., Ge X.L., Et al., Shape memory polymer and its application prospects, Materials Review A: Review Papers, 29, 11, (2015)
  • [6] Zhou H.L., Zhao L.Y., Li Y.B., Et al., Preparation and properties of liquid crystal polymer toughened epoxy resin/glass fiber composites, Journal of Chongqing University of Technology (Natural Science), 11, (2017)
  • [7] Huang J., Yuan F.P., Zhou T., Research on performance of disc and cylinder composite temperature control type magnetorheological transmission, Journal of Chongqing University of Technology (Natural Science), 31, 2, (2017)
  • [8] Zhao Q., Qi H., Xie T., Recent progress in shape memory polymer: New behavior, enabling materials, and mechanistic understanding, Progress in Polymer Science, 49-50, (2015)
  • [9] Lin Y., Liu T.M., Research progress of shape memory polymer, Bulletin of the Chinese Ceramic Society, 34, (2015)
  • [10] Wei K., Tang Y.S., Zhu G.M., Et al., Studies on shape memory hydro-epoxy system, Journal of Aeronautical Materials, 32, 3, (2012)
12