Analysis on fracture properties of concrete-epoxy interface

被引：2
|
作者：
机构：
[1] Zhang, Yuanmiao
[2] Yu, Jiangtao
[3] Lu, Zhoudao
来源：
Yu, J. (yujiangtao@tongji.edu.cn) | 1600年 / Science Press卷 / 42期
关键词：
Fracture mechanics - Fracture toughness - Concretes;
D O I：
10.3969/j.issn.0253-374x.2014.07.007
中图分类号：
学科分类号：
摘要：
Sandwiched wedge splitting method and double-K fracture model were used to study the fracture properties of concrete-epoxy interface. Compared to the prototype specimens, the cracking load, ultimate load, double-K fracture parameters and fracture energy of the sandwiched specimens formed by epoxy injection improve, while the cohesive fracture toughness shows no improvement. To specimens with rough interface, the cohesive fracture toughness value calculated with soften curve is identical with that of the test. And the cohesive fracture toughness value of specimens with smooth interface is lower than that of specimens with rough interface because of the wall effect. It is assumed that the epoxy injection technique helps postpone the developing of cracks in sandwiched specimens, which improves the initial fracture toughness. The initial fracture toughness is used to judge interface crack deflection, and the results agree well with the tests. It is recommended that the initial fracture toughness be used to characterize the fracture properties of concrete-epoxy interface.
引用
收藏
相关论文
共 50 条
  • [41] DYNAMIC AND STATIC FRACTURE TOUGHNESS OF AL/EPOXY RESIN INTERFACE
    Saito, Yusaku
    Sudo, Kosuke
    Kanamori, Kohei
    Yonezu, Akio
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2019, VOL 12: ADVANCED MATERIALS: DESIGN, PROCESSING, CHARACTERIZATION, AND APPLICATIONS, 2020,
  • [42] Influence of variation in the local interface fracture properties on shear debonding of CFRP composite from concrete
    Subramaniam, Kolluru V. L.
    Ghosn, Michel
    Ali-Ahmad, Mohamad
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2017, 31 (19-20) : 2202 - 2218
  • [43] A superimposed cohesive zone model for investigating the fracture properties of concrete-asphalt interface debonding
    Mu, F.
    Vandenbossche, J.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (04) : 496 - 511
  • [44] Nanoscale analysis of tensile properties and fracture of nanoreinforced epoxy polymer using micromechanics
    Wang, Zhenqing
    Liu, Fang
    Liang, Wenyan
    Zhou, Limin
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2013, 32 (16) : 1224 - 1233
  • [45] Investigation of Interface Fracture between BFPMPC and Cement Concrete
    Liu, Fei
    Pan, Baofeng
    Zhou, Changjun
    Wang, Baomin
    TRANSPORTATION RESEARCH RECORD, 2024, 2678 (07) : 86 - 110
  • [46] LIMITS OF CONVENTIONAL MICROMECHANICAL ANALYSIS OF INTERFACE PROPERTIES IN GLASS EPOXY MODEL COMPOSITES
    FEILLARD, P
    ROUBY, D
    DESARMOT, G
    FAVRE, JP
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 188 (1-2): : 159 - 166
  • [47] Nonlinear fracture properties of concrete-concrete interfaces
    Shah, Santosh G.
    Kishen, J. M. Chandra
    MECHANICS OF MATERIALS, 2010, 42 (10) : 916 - 931
  • [48] Fracture properties of concrete containing recycled concrete aggregates
    Bordelon, A.
    Cervantes, V.
    Roesler, J. R.
    MAGAZINE OF CONCRETE RESEARCH, 2009, 61 (09) : 665 - 670
  • [49] Effects of elevated temperature on rubber concrete: Fracture properties and mechanism analysis
    Wu, Liangqin
    Li, Renfeng
    Zhu, Zhiyong
    Pan, Tanbo
    Aydin, Beyazit Bestami
    Zhou, Yubao
    CONSTRUCTION AND BUILDING MATERIALS, 2025, 466
  • [50] Analysis of Interface Fracture on Piping Welded Joint with Continuous Material Properties
    Zhao Lingyan
    Xue He
    Jiao Kang
    Tang Wei
    2013 FOURTH INTERNATIONAL CONFERENCE ON DIGITAL MANUFACTURING AND AUTOMATION (ICDMA), 2013, : 207 - 210
12345