Technique research on flexibility and toughness modification for epoxy asphalt concrete

被引:0
|
作者
Zhang, Zheng-Qi [1 ]
Zhang, Ke [1 ]
Li, Zhi-Hong [1 ]
Yao, Xiao-Guang [1 ]
Wang, Kang [2 ]
机构
[1] Key Laboratory for Special Area Highway Engineering of the Ministry of Education, Chang'an University, Xi'an,Shaanxi, China
[2] China Airport Construction Corporation of CAAC, Beijing, China
关键词
Polyesters - Steel fibers - Concrete mixtures - Fracture mechanics - Rubber - Epoxy resins - Temperature - Fatigue testing - Mixtures;
D O I
暂无
中图分类号
学科分类号
摘要
To solve the problem of hardness and brittleness after the hardening of epoxy asphalt concrete in steel deck pavement, its poor coordination with the bridge deck, and its proneness to crack, a means was introduced to improve the flexibility and toughness of epoxy asphalt concrete by adding rubber particles and polyester fiber. The low-temperature bending test and bending fatigue test were carried out to analyze the influence of rubber particles and polyester fiber on bending failure strain and fatigue life of epoxy asphalt concrete. The results show that the flexibility and toughness of epoxy asphalt concrete can be improved after adding rubber particles and polyester fiber. The flexible performance of the mixture is improved through the crazing effect caused by adding rubber particles, and the optimum dosage of rubber particle is 2.1%. While polyester fiber greatly improves the toughness properties of the mixture through the combined action of structure-asphalt and fiber net developing in the blends, and the optimum dosage of polyester fiber is 0.3%. ©, 2015, Editorial Department of Journal of Chang'an University (Natural Science Edition). All right reserved.
引用
收藏
页码:1 / 7
相关论文
共 50 条
  • [11] Toughness modification of SBS/CRMA on epoxy asphalt: curing behaviour and low-temperature cracking characteristic analysis
    Zhou, Yixin
    Xu, Gang
    Yu, Hao
    Fan, Yulou
    Wang, Houzhi
    Yang, Jun
    Wu, You
    Wang, Haopeng
    Huang, Wei
    INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2024, 25 (01)
  • [12] Modification of Epoxy Grouting Material in Toughness and Penetration
    Kai P.
    Zhiwei X.
    Huiping L.
    Yijun L.
    Haocheng Z.
    Lijie W.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2023, 39 (12): : 137 - 146
  • [13] SURFACE MODIFICATION OF AGGREGATE IN ASPHALT CONCRETE
    JU, RF
    LEE, YL
    LIN, SH
    BURKE, WJ
    COLLOIDS AND SURFACES, 1990, 49 (3-4): : 395 - 399
  • [14] Performance evaluation of Epoxy asphalt and study of Epoxy asphalt used on deck surfacing of concrete bridge
    Li, Yanchun
    Zhang, Pan
    Lv, Rui
    Xu, Yuzhuo
    Huo, Guojing
    INTELLIGENT MATERIALS, APPLIED MECHANICS AND DESIGN SCIENCE, 2012, 142 : 157 - +
  • [15] Modelling the Rheological Properties of Epoxy Asphalt Concrete
    Bo Yao
    Cheng Cheng
    Xiao Wang
    Gang Cheng
    Song-Yu Liu
    Journal of Harbin Institute of Technology(New series), 2013, (06) : 106 - 111
  • [16] Modelling the rheological properties of epoxy asphalt concrete
    Yao, B. (seuyaobo@163.com), 1600, Harbin Institute of Technology, P.O. Box 136, Harbin, 150001, China (20):
  • [17] Flexibility improvement of epoxy resin by chemical modification
    Ratna, D
    Samui, AB
    Chakraborty, BC
    POLYMER INTERNATIONAL, 2004, 53 (11) : 1882 - 1887
  • [18] Improving toughness of epoxy asphalt binder with reactive epoxidized SBS
    Jiang, Yongjia
    Zhao, Ruikang
    Xi, Zhonghua
    Cai, Jun
    Yuan, Zuanru
    Zhang, Junsheng
    Wang, Qingjun
    Xie, Hongfeng
    MATERIALS AND STRUCTURES, 2021, 54 (04)
  • [19] Improving toughness of epoxy asphalt binder with reactive epoxidized SBS
    Yongjia Jiang
    Ruikang Zhao
    Zhonghua Xi
    Jun Cai
    Zuanru Yuan
    Junsheng Zhang
    Qingjun Wang
    Hongfeng Xie
    Materials and Structures, 2021, 54
  • [20] PDMS Nanodomains in DGEBA Epoxy Induce High Flexibility and Toughness
    Romo-Uribe, Angel
    Antonio Arcos-Casarrubias, Jose
    Reyes-Mayer, Adriana
    Guardian-Tapia, Rene
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2017, 56 (01) : 96 - 107