Numerical simulation and experimental study on cyclic multi-point incremental forming process

被引：0

作者：

机构：

[1] [1,Luo, Yuanxin

[2] Yang, Wanmian

[3] Liu, Zhifang

[4] 1,Wang, Yongqin

[5] Du, Ruxu

来源：

Luo, Yuanxin (yxluo@cqu.edu.cn) | 1600年 / Springer London卷 / 85期

关键词：

Cyclic multi-point incremental forming (CMPIF) is a new flexible forming process derived from multi-point forming (MPF) and single-point incremental forming (SPIF) methods. In MPF process; the pins are positioned to special locations and fixed together as the discrete upper/lower die with cooperation of a hydraulic/mechanical press to form a part in several seconds. Similar to MPF process; the proposed CMPIF process is also with discretized dies consisted of a matrix of pins. However; its pins are cyclically controlled to move a small step until all pins approximated gradually to the final shape of the part. Therefore; the forming force of CMPIF process is relative smaller than that of MPF process as well as the energy consumption. In this paper; the CMPIF process was simulated by using a mild steel Q235B plate in MSC.Marc®. An experimental setup to perform the CMPIF process was designed and realized. The pins were driven by threaded rods with spherical hinge at the head to eliminate local dimples. The pins were driven manually to move forward to form a flat plate into the desired final shape. The final shape of workpiece was scanned by a 3D laser scanning system and reconstructed to a 3D surface. The experimental results were compared to that of numerical simulation. It could be seen that the doubly curved plate can be formed effectively by the CMPIF method. © 2015; Springer-Verlag London;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：5 / 8

共 50 条

[31] Numerical simulation and experimental investigation of incremental sheet forming process
Han Fei
Mo Jian-hua
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2008, 15 (05): : 581 - 587
[32] Numerical simulation of sheet metal multi-point stretch forming technology
Liu, Wei
Ma, XiaoLu
Li, MingZhe
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 7, 2009, : 453 - 457
[33] Numerical simulation and experimental investigation of incremental sheet forming process
Fei Han
Jian-hua Mo
Journal of Central South University of Technology, 2008, 15 : 581 - 587
[34] Single-point incremental forming of sheet metals: Experimental study and numerical simulation
Benedetti, Matteo
Fontanari, Vigilio
Monelli, Bernardo
Tassan, Marco
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (02) : 301 - 312
[35] Numerical-Experimental Comparison Study Regarding Single Point Incremental Forming Process
Oleksik, Valentin
Pascu, Adrian
Roca, Liviu
Bondrea, Ioan
11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES (NUMIFORM 2013), 2013, 1532 : 532 - 537
[36] Experimental and Numerical Investigation on Effects of Pin Diameter on Multi-Point Forming
Tandogan, Mahmut
Eyercioglu, Omer
Engin, Kaan Emre
PROCESSES, 2023, 11 (02)
[37] A new flexible multi-point incremental sheet forming process with multi-layer sheets
Zhao, Xuelei
Ou, Hengan
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 322
[38] Numerical simulation of material failure in single point incremental forming process
Rusu, G. P.
Popp, M. O.
Oleksik, M.
Rodean, C.
INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI, 2019, 564
[39] Simulation on dynamic contact forces of punches in multi-point forming process
Chen X.
Li M.
Fu W.
Gong X.
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2010, 41 (10): : 223 - 226
[40] NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE SINGLE POINT SHEETS INCREMENTAL FORMING PROCESS
Fontanari, Vigilio
Benedetti, Matteo
Bruschi, Stefania
Fuganti, Antonio
ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,

← 1 2 3 4 5 →