Precise alignment method of the large-scale crankshaft during non-circular grinding

被引：0
|
作者：
20155101698862
机构：
[1] Shen, Nanyan
[2] Li, Jing
[3] Ye, Jun
[4] Qian, Xiang
[5] Huang, Haitao
来源：
Li, Jing (ian1982@shu.edu.cn) | 1600年 / Springer London卷 / 80期
关键词：
A large-scale crankshaft of internal-combustion engine is easy to bend and twist when clamped onto the grinding machine. The deviation of workpiece axis from its optimal machining axis has a significant influence on machining accuracy of angle; eccentric throw; and diameter and contour of the heavy crankshaft in non-circular grinding. To reduce the consumption of manual labor and setting-up time; an automatic alignment approach and apparatus is proposed and integrated into the non-circular grinder. The on-machine gauge senses X and Y components of deviation of crank journal axis and feed them back to the computerized numerical control system. The motor-driving steady rests based on slider-crank mechanism are controlled to compensate for the deviation. The algorithm with self-correcting ability for compensation value is employed to make up for the finite contact stiffness of workpiece and steady rest. The results of three alignment tests are compared; which demonstrates the better effect on alignment precision and efficiency of the self-correcting compensation. © 2015; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 50 条
  • [21] Prediction of angle error due to torsional deformation in non-circular grinding
    Jang, Joon
    Choi, Woo Chun
    MECHANICAL SCIENCES, 2021, 12 (01) : 51 - 57
  • [22] Error Compensation Through Analysis of Force and Deformation in Non-circular Grinding
    Jang, Joon
    Choi, Woo Chun
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2022, 23 (06) : 627 - 638
  • [23] A hydraulic elastic feed drive for fine grinding of non-circular element
    Ruan, J
    Wang, QF
    Zhang, LB
    Yuan, JL
    Yang, QH
    ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 706 - 709
  • [24] The Research of the Non-circular Contour Grinding Speed Optimization and NC Programming
    Cao, De Fang
    Duan, Jin Ni
    MATERIALS SCIENCE, MECHANICAL ENGINEERING AND APPLIED RESEARCH, 2014, 628 : 229 - 234
  • [25] Prediction and analysis of non-circular grinding process stability based on dynamic grinding process simulation
    Liu, Tao
    Deng, Zhaohui
    Yao, Qishui
    Lu, Lishu
    Yu, Jianghong
    Zhendong yu Chongji/Journal of Vibration and Shock, 2024, 43 (10): : 236 - 247
  • [26] A new method for boring of non-circular holes
    Zhang K.
    Hu D.-J.
    Frontiers of Mechanical Engineering in China, 2006, 1 (4): : 456 - 460
  • [27] Large twisting of non-circular cylinders in unconstrained elasticity
    Falope, Federico Oyedeji
    Lanzoni, Luca
    Tarantino, Angelo Marcello
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2024, 161
  • [28] Torsional Vibration Analysis for Large-Scale Reciprocating Compressor Crankshaft
    Zhan, Ke
    Yu, Xiaoling
    Yu, Binyan
    Xie, Jia
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2014, 457-458 : 428 - 432
  • [29] Experimental Research on Self-alignment Design Principle of a Large-scale Precise Machine Bed
    Yan, Zhanhui
    Cao, Yi
    Yu, Junyi
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 306 - +
  • [30] Stability Modeling and Analysis of Non-circular High-speed Grinding with Consideration of Dynamic Grinding Depth
    Liu T.
    Deng Z.
    Luo C.
    Lü L.
    Li Z.
    Wan L.
    Deng, Zhaohui (edeng0080@vip.sina.com); Deng, Zhaohui (edeng0080@vip.sina.com), 1600, Chinese Mechanical Engineering Society (57): : 264 - 274
12345