Reactive processing of polyolefins with MAH and GMA in the presence of various additives

被引：0

作者：

Chandranupap, Pravitra ^{[1
]}

Bhattacharya, Sati N. ^{[1
]}

机构：

[1] Rheol. and Mat. Processing Centre, Dept. of Chem. and Metall. Eng., Roy. Melbourne Institute Technology, Melbourne, Vic., Australia

来源：

| 1600年 / John Wiley & Sons Inc, New York, NY, United States卷 / 78期

关键词：

Addition reactions - Additives - Grafting (chemical) - Indicators (chemical) - Monomers - Styrene;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper describes the initial results obtained on the study of the reactive processing of polyolefins (LLDPE, PP) with maleic anhydride (MAH) and glycidyl methacrylate (GMA) in the presence of styrene, dimethyl sulfoxide (DMSO), and dimethylacetamide (DMAC). The investigation of the processing torque obtained from the grafting reaction showed that the torque could be used as an indicator for some product properties such as gel content and percentage of grafting. Addition of a monomer such as styrene and electron donor compounds such as DMSO and DMAC showed significant improvement in processing properties in comparison with additive-free systems.

引用

共 50 条

[21] LIQUEFACTION OF KANSK-ACHINSK COALS IN THE PRESENCE OF VARIOUS CATALYTIC ADDITIVES
KRICHKO, AA
SHPIRT, MY
YULIN, MK
ZEKEL, LA
PCHELINA, DP
KRASNOBAEVA, NV
SOLOVOVA, VV
JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1987, 60 (06): : 1279 - 1281
[22] Reactive-Mechanical Processing for Recycling of Multilayer Films Waste Based on Polyolefins From Packaging
da Silva, Emerson Ferreira
de Andrade, Antonio Jose
Saron, Clodoaldo
ENVIRONMENTAL QUALITY MANAGEMENT, 2024, 34 (02)
[23] Modification of thermoplastics for density and gas permeability through additives and reactive processing
Xanthos, M
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 3962 - 3964
[24] Aerobic decolorization of reactive azo dyes in presence of various cosubstrates
Padmavathy, S
Sandhya, S
Swaminathan, K
Subrahmanyam, YV
Chakrabarti, T
Kaul, SN
CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY, 2003, 17 (02) : 147 - 151
[25] The Relevance of Multi-Injection and Temperature Profiles to Design Multi-Phase Reactive Processing of Polyolefins
Hernandez-Ortiz, Julio C.
Van Steenberge, Paul H. M.
Duchateau, Jan N. E.
Toloza, Carolina
Schreurs, Fons
Reyniers, Marie-Francoise
Marin, Guy B.
D'hooge, Dagmar R.
MACROMOLECULAR THEORY AND SIMULATIONS, 2019, 28 (06)
[26] Lipase purification by various techniques and its thermostabilization in presence of surface active additives
Bodhankar, SS
Rajamani, V
Gaikar, VG
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 1998, 71 (02) : 155 - 161
[27] Inhibiting Au nanoparticle aggregation in freeze-thawing by presence of various additives
Kadowaki, Miki
Yokota, Hidetaka
Imanaka, Hiroyuki
Ishida, Naoyuki
Imamura, Koreyoshi
ADVANCED POWDER TECHNOLOGY, 2021, 32 (10) : 3517 - 3524
[28] Lipase purification by various techniques and its thermostabilization in presence of surface active additives
Department of Chemical Technology, University of Mumbai, Matunga, Mumbai-400019, India
J. Chem. Technol. Biotechnol., 2 (155-161):
[29] PHOTOCHEMICAL BRIGHTNESS REVERSION OF PEROXIDE BLEACHED MECHANICAL PULPS IN THE PRESENCE OF VARIOUS ADDITIVES
DEVIOLET, PF
NOURMAMODE, A
COLOMBO, N
ZHU, J
CASTELLAN, A
CELLULOSE CHEMISTRY AND TECHNOLOGY, 1990, 24 (02): : 225 - 235
[30] A two-phase stochastic model to describe mass transport and kinetics during reactive processing of polyolefins
Hernandez-Ortiz, Julio C.
Van Steenberge, Paul H. M.
Duchateau, Jan N. E.
Toloza, Carolina
Schreurs, Fons
Reyniers, Marie-Francoise
Marin, Guy B.
D'hooge, Dagmar R.
CHEMICAL ENGINEERING JOURNAL, 2019, 377

← 1 2 3 4 5 →