Investigation Into Roll Thrust Bearing Damage and Modeling of Roll Thrust Forces for the 4-High Reversing Rougher of a Hot Strip Mill

被引：0
|
作者：
机构：
来源：
Iron and Steel Technology | 2015年 / 12卷 / 01期
关键词：
Back-up rolls - Contact Mechanics - Elastic cylinders - Hot strip mills - Metal flow - Simplified formula - Thrust forces - Work rolls;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new model to calculate the thrust force between the work roll and the backup roll under roll crossing is derived based on the principles of tractive rolling of elastic cylinders in contact mechanics. Another new model to calculate the thrust force between work rolls and the slab is derived, considering the lateral metal flow of the slab. Simplified formulae of these two models are derived for easy application.
引用
收藏
页码：267 / 275
相关论文
共 35 条
  • [21] The research of 2 degrees of freedom vertical vibration system modeling for 4-high hot strip mill stands
    Ma, Weijin
    Wang, Mirui
    Li, Fenglan
    Wang, Junyuan
    Xiong, Shibo
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 1759 - +
  • [22] Combined Setting Technology of the Bending Roll in Five Stands 4-high Reduction Cold Mill
    Zhou, Lian Lian
    Ma, Xu Chuang
    Kong, Ling Kun
    PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2045 - 2049
  • [23] The Comparative Studies of Two Control Methods on 4-high CVC Hot Strip Mill
    Zhao Tieyong
    Xiao Hong
    ICICTA: 2009 SECOND INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION, VOL I, PROCEEDINGS, 2009, : 907 - 910
  • [24] Development of centrifugal cast roll with high wear resistance for finishing stands of hot strip mill
    Ichino, Kenji
    Kataoka, Yoshihiro
    Koseki, Tomoya
    Kawasaki Steel Technical Report, 1997, (37): : 13 - 18
  • [25] Premature Failure Analysis of the High-Speed Steel Work Roll of Hot Strip Mill
    Ganesh, G. H.
    Rao, P. Mallikarjuna
    Raghushant, J.
    Madhusudhan, R.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2024, 24 (05) : 2509 - 2516
  • [26] SKIN PASS ROLLING COLD-ROLLED SHEET ON A 4-HIGH MILL WITH ONE DRIVE ROLL
    PARGAMONOV, EA
    TROSHCHENKOV, NA
    TSELOVALNIKOV, VM
    BRISHTEN, NS
    METALLURGIST, 1978, 22 (1-2) : 119 - 120
  • [27] An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling
    Nilsson, M.
    Olsson, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, 227 (08) : 837 - 844
  • [28] EFFECT OF ROLLING SPEED ON HIGH-TEMPERATURE WEAR PROPERTIES OF ROLL MATERIALS FOR HOT STRIP MILL
    NOGUCHI, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1211 - 1211
  • [29] Design of a Kind of Backup Roll Contour Used in Four-High CVC Hot Strip Mill
    Li, Guangtao
    Gong, Dianyao
    Lu, Xing
    Wang, Zhenhua
    Zhang, Dianhua
    ISIJ INTERNATIONAL, 2019, 59 (03) : 504 - 513
  • [30] ANALYSIS OF ROLL CHOCK STRENGTH AND BEARING LOAD DISTRIBUTION AT MIZUSHIMA HOT STRIP MILL, KAWASAKI-STEEL-CORP
    NAKANO, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S386 - S386
1234