Reactive Voltage Partition Method Based on Voltage Critical Steady State

被引：0

作者：

Zhong J. ^{[1
]}

Jiao X. ^{[1
]}

Wang Z. ^{[2
]}

机构：

[1] School of Electrical Engineering and Information, Sichuan University, Chengdu, 610065, Sichuan Province

[2] State Grid Sichuan Electric Power Company, Chengdu, 610041, Sichuan Province

来源：

Dianwang Jishu/Power System Technology | 2019年 / 43卷 / 10期

关键词：

Adaptive AP clustering; Partition points; Reactive power networks partition; U-λ; sensitivity; Voltage critical steady;

D O I：

10.13335/j.1000-3673.pst.2018.2645

中图分类号：

学科分类号：

摘要：

Considering the influence of uncertainty of power flow distribution on power grid partition, a method for partitioning reactive power networks based on voltage critical steady state is proposed. Firstly, bus U-λ sensitivity derived from dynamic power flow equation is introduced into definition of reactive voltage/power sensitivity. Then an electrical distance matrix is constructed with the system voltage critical steady state as the partition point, and the adaptive AP clustering method is used to realize unified partition of the power grid. Finally, partition quality is evaluated from the perspectives of power control strength index, partition coupling degree index and reactive reserve margin index. Simulation result in IEEE 14-bus and IEEE 39-bus systems and partition quality evaluation index show that the proposed method can effectively partition power grid and ensure sufficient reactive reserve in the partition. © 2019, Power System Technology Press. All right reserved.

引用

页码：3761 / 3768

页数：7

共 22 条

[21] Zhao J., Yu Y., Determination of power system voltage stability regions and critical sections, Automation of Electric Power Systems, 32, 17, pp. 1-5, (2008)
[22] Pan G., Wang X., Peng X., Et al., Study of power grid partition identification method based on community structure detection, Power System Protection and Control, 41, 13, pp. 116-121, (2013)

← 1 2 3 →