Synergistic extraction of Co(II) over Ni(II) from chloride solutions by a mixture of Cyanex 301 and LIX 63

被引:6
|
作者
Wang L.Y. [1 ,2 ]
Lee M.S. [2 ]
机构
[1] Key Laboratory of Clean Chemical Processing Engineering of Shandong Province, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao
[2] Department of Advanced Material Science & Engineering, Institute of Rare Metal, Mokpo National University, Channam
来源
Lee, Man Seung (mslee@mokpo.ac.kr) | 1600年 / Taylor and Francis Ltd.卷 / 20期
关键词
cobalt; mixture of Cyanex 301 and LIX 63; nickel; separation; Synergistic extraction;
D O I
10.1080/12269328.2017.1323680
中图分类号
学科分类号
摘要
It is difficult to separate Co(II) and Ni(II) by extraction with single Cyanex 301 from acidic solution. The synergistic extraction of Co(II) over Ni(II) from aqueous chloride solutions was studied using a mixture of Cyanex 301 and LIX 63. A significant synergistic extraction of Co(II) with the synergistic enhancement factor of 191 was obtained by adding LIX 63 to Cyanex 301, while Ni(II) extraction was little affected. The highest separation factor of 10 was obtained at an optimum composition of the mixture. The extraction reactions with this mixture were proposed on the basis of slope analysis. The extracted species of Co(II) and Ni(II) was found to be Co(HA2)2·HB and Ni(HA2)2, respectively. Effective stripping of Co(II) and Ni(II) was attained by using different concentrations of HCl solution. It is feasible to apply this mixture for the separation of Co(II) and Ni(II) from the leach liquor of laterite ore. © 2017 The Korean Society of Mineral and Energy Resources Engineers (KSMER).
引用
收藏
页码:311 / 317
页数:6
相关论文
共 50 条
  • [21] Palladium extraction by a cyanex 301-based binary extractant from chloride solutions
    Zhidkova, T. I.
    Belova, V. V.
    Brenno, Yu. Yu.
    Zhidkov, L. L.
    Khol'kin, A. I.
    RUSSIAN JOURNAL OF INORGANIC CHEMISTRY, 2009, 54 (09) : 1502 - 1506
  • [22] Chemical Model for Solvent Extraction Equilibrium of Mn(II) by Cyanex 272 from Chloride Solutions
    Batchu, Nagaphani Kumar
    Kim, Bo Eun
    Lee, Man Seung
    KOREAN JOURNAL OF METALS AND MATERIALS, 2014, 52 (06): : 445 - 450
  • [23] Separation of Silver (I) and Zinc(II) from Nitrate Solutions by Solvent Extraction with LIX63
    Sun, Pan-Pan
    Min, Byoung-Jun
    Kim, Sung-Tae
    Cho, Sung-Yong
    MATERIALS TRANSACTIONS, 2017, 58 (02) : 287 - 290
  • [24] Extraction studies of cobalt (II) and nickel (II) from chloride solutions using Na-cyanex 272. Separation of Co(II)/Ni(II) by the sodium salts of D2EHPA, PC88A and Cyanex 272 and their mixtures
    Sarangi, K
    Reddy, BR
    Das, RP
    HYDROMETALLURGY, 1999, 52 (03) : 253 - 265
  • [25] Solvent Extraction of Ni(II) from Sulfate Solutions with LIX 84I: Flow-Sheet for the Separation of Cu(II), Ni(II) and Zn(II)
    B. Ramachandra Reddy
    D. Neela Priya
    Analytical Sciences, 2004, 20 : 1737 - 1740
  • [26] Solvent extraction of Ni(II) from sulfate solutions with LIX 84I: Flow-sheet for the separation of Cu(II), Ni(II) and Zn(II)
    Reddy, BR
    Priya, DN
    ANALYTICAL SCIENCES, 2004, 20 (12) : 1737 - 1740
  • [27] Separation of gold(III) from hydrochloric acid solution containing platinum(IV) and palladium(II) by solvent extraction with Cyanex 272 and LIX 63
    Xing, Wei Dong
    Lee, Man Seung
    Kim, Young Hwan
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2018, 59 : 328 - 334
  • [28] Solvent extraction equilibrium and modeling studies of manganese from sulfate solutions by a mixture of Cyanex 301 and TBP
    Batchu, Nagaphani Kumar
    Sonu, Chong Ho
    Lee, Man Seung
    HYDROMETALLURGY, 2014, 144 : 1 - 6
  • [29] Palladium(II) extraction from nitric acid solutions by LIX 34
    Elizalde, Maria
    Menoyo, Begona
    Ocio, Argune
    del Sol Rua, Maria
    JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 2014, 89 (06) : 884 - 889
  • [30] Solvent extraction separation of Cu(II) and Ni(II) with bis(2,4,4-trimethylpentyl)dithiophosphinic acid (Cyanex 301)
    Shinde, PS
    Dhadke, PM
    INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 1996, 3 (06) : 367 - 370