Research on High Structural Strength MEMS S&A Device for Micro Initiator

被引：0
|
作者：
Hu T. [1 ]
Ren W. [1 ,2 ]
Zhao Y. [1 ]
Wang K. [1 ]
机构：
[1] State Key Laboratory for Manufacturing System Engineering, Xi’an Jiaotong University, Xi’an
[2] Science and Technology on Applied Physical Chemistry Laboratory, Shaanxi Applied Physics and Chemistry Research Institute, Xi’an
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2022年 / 58卷 / 17期
关键词：
electro-thermal actuation; MEMS S&A device; metal/silicon composite barrier; status recovery;
D O I：
10.3901/JME.2022.17.206
中图分类号：
TM [电工技术];
学科分类号：
0808 ;
摘要：
In order to enhance the fabrication precision and the structural strength of MEMS S&A (Micro-Electro-Mechanical-System Safety-and-Arming)device simultaneously, a novel MEMS S&A device with the metal/silicon composite barrier has been introduced. The device is mainly based on the silicon substrate. By designing the reinforce metal layer on the silicon barrier, the technical contradiction between structural precision and strength can be solved. Based on the electro-thermal principle, the MEMS S&A device can generate 1 mm bi-direction displacement in 0.9 s to achieve status conversion. The detonation tests results show that: Under the armed mode, the flyer can fly out smoothly; Under the safe mode, the flyer will hit the composite barrier directly. The silicon part is broken, but the metal part remains intact. Confined by the metal part, the broken silicon will not fly out to form a secondary flyer. Therefore, the structural strength of the device is effectively improved. The total size of MEMS S&A device is 8 mm×15 mm× 0.75 mm, the minimum structure width is 5 μm, and the anti-overload ability is 10 000 g. This MEMS S&A device characterizes miniaturization and integration. © 2022 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：206 / 214
页数：8
相关论文
共 20 条
  • [11] PEZOUS H, ROSSI C, SANCHEZ M, Et al., Integration of a MEMS based safe arm and fire device[J], Sensors & Actuators A, 159, pp. 157-167, (2010)
  • [12] Peng ZHU, HOU Gang, WANG Haoyu, Et al., Design，preparation，and performance of a planar ignitor inserted with PyroMEMS safe and arm device[J], Microelectromechanical Systems，Journal of, 27, 6, pp. 1186-1192, (2018)
  • [13] FENG Hengzhen, LOU Wenzhong, WANG Dakui, Et al., Explosion suppression mechanism characteristics of MEMS S&A device with in situ synthetic primer[J], Micromachines, 9, 12, pp. 652-666, (2018)
  • [14] Ming YIN, ZHANG Jinxin, WANG Kexuan, Et al., A preliminary study on the key factors affecting the performance of micro energy conversion unit of slapper detonator[J], Initiators & Pyrotechnics, 4, pp. 1-5, (2019)
  • [15] ZHANG Qinming, HUANG Fenglei, Introduction to hypervelocity impact dynamics, (2000)
  • [16] Tengjiang HU, ZHAO Yulong, ZHAO You, Et al., Integration design of a MEMS based fuze[J], Sensors & Actuators A, 268, pp. 193-200, (2017)
  • [17] NOGUCHI K, FUJITA H, SUZUKI M, Et al., The measurements of friction on micromechatronics elements[C], 1991 Proceedings. IEEE Micro Electro Mechanical Systems, (1991)
  • [18] ZHANG Yuxing, HUANG Qinan, Rengang LI, Et al., Macro-modeling for polysilicon cascaded bent beam electrothermal microactuators[J], Sensors and Actuators A Physical, 128, 1, pp. 165-175, (2006)
  • [19] YANG Yusheng, Yuhsin LIN, Yuchiuen HU, Et al., A large-displacement thermal actuator designed for MEMS pitch-tunable grating[J], Journal of Micromechanics & Microengineering, 19, 1, pp. 015001-015013, (2009)
  • [20] Tengjiang HU, Kuang FANG, ZHANG Zhiming, Et al., The research on MEMS S&A device with metal-silicon composite structure[J], Journal of Microelectromechanical Systems, 28, (2019)
12