Development of Ir based tool for friction stir welding of high temperature materials

被引：0
|
作者：
Tomoaki M. [1 ]
Yuichi I. [1 ]
Tomohiro M. [1 ]
Hidetoshi F. [2 ]
机构：
[1] Furuya Metal Co., Ltd.
[2] Welding Research Institute, Osaka University
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2010年 / 28卷 / 02期
关键词：
Friction stir welding; High temperature properties; Iridium; Rhenium; Welding tool;
D O I：
10.2207/qjjws.28.203
中图分类号：
学科分类号：
摘要：
A friction stir welding (FSW) tool with good properties at elevated temperature is needed to perform the friction stir welding of high temperature materials. One of the reasons for delaying the application of FSW to high temperature metals is the absence of such a tool. The purpose of this study was to develop a welding tool for the FSW of high temperature materials. As a result, it has been clarified that iridium (Ir) is almost unaffected by oxidation at elevated temperatures. The Ir alloy increases its recrystallization temperature, high-temperature strength and high-temperature hardness by the addition of rhenium (Re). Although SUS304 stainless steel was friction stir welded by an Ir-10at%Re welding tool, the tool was hardly deformed.
引用
收藏
页码：203 / 207
页数：4
相关论文
共 50 条
  • [31] Tool materials selection for friction stir welding of L80 steel
    Gan, W.
    Li, Z. T.
    Khurana, S.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (07) : 610 - 613
  • [32] Tool for Friction Stir Welding in the Aerospace Industry
    Kuritsyn D.N.
    Denisov L.V.
    Siluyanova M.V.
    Kuritsyna V.V.
    Russian Engineering Research, 2020, 40 (03) : 245 - 248
  • [33] Design and Optimization of Friction Stir Welding Tool
    Aissani, Mouloud
    Gachi, Saliha
    Boubenider, Fouad
    Benkedda, Younes
    MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (11) : 1199 - 1205
  • [34] Friction-based welding processes: friction welding and friction stir welding
    Kumar Rajak, Dipen
    Pagar, Durgesh D.
    Menezes, Pradeep L.
    Eyvazian, Arameh
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020, 34 (24) : 2613 - 2637
  • [35] Bobbin tool friction stir welding: a review
    Fuse, Kishan
    Badheka, Vishvesh
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (04) : 277 - 304
  • [36] Influence of tool geometry in friction stir welding
    Kumar, K.
    Kailas, Satish V.
    Srivatsan, T. S.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (02) : 189 - 195
  • [37] TOOL HOLDER DESIGN FOR FRICTION STIR WELDING
    Meran, Cemal
    Colak, Mustafa
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2008, 23 (03): : 671 - 679
  • [38] Development of friction stir welding of high strength steel sheet
    Matsushita, M.
    Kitani, Y.
    Ikeda, R.
    Ono, M.
    Fujii, H.
    Chung, Y. -D.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (02) : 181 - 187
  • [39] Thermodynamics guided design and processing of a WC/HEA cermet tool for high temperature friction stir welding
    Gaddam, Supreeth
    Yadav, Surekha
    Behera, Amit Kishan
    Arai, Noriaki
    Mahbooba, Zaynab
    Jha, Shikhar Krishn
    Zhang, Qiaofu
    Mishra, Rajiv S.
    MATERIALS & DESIGN, 2025, 250
  • [40] Development of friction stir welding of high strength steel sheet
    Matsushita, M.
    Kitani, Y.
    Ikeda, R.
    Oi, K.
    Fujii, H.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 87 - +
12345