Milling and hot consolidation of Al-Fe-Nb alloy

被引：0

作者：

Rodrigues, C.A.D. ^{[1
]}

Yavari, A.R. ^{[2
]}

Kiminami, C.S. ^{[1
]}

Botta F., W.J. ^{[1
]}

机构：

[1] Depto. de. Engenharia de Materiais, Universidade Federal de Sao Carlos, P.O. box. 676, 13565-905, São Carlos, SP, Brazil

[2] Euronano, Inst. Natl. Polytech. de Grenoble, BP 75, 38402 St-Martin-d'Heres Campus, France

来源：

Materials Science Forum | 2003年 / 416-418卷 / 01期

关键词：

Amorphous materials - Consolidation - Crystal microstructure - Heat treatment - Mechanical alloying - Mechanical properties - Metal extrusion - Nanostructured materials - Phase equilibria - Powder metals - Ternary systems - Yield stress;

D O I：

10.4028/www.scientific.net/msf.416-418.287

中图分类号：

学科分类号：

摘要：

We present in this work the preparation of partially amorphous Al90Fe7Nb3 alloy powders by mechanical alloying using high-purity elemental metals as starting materials and their consolidation by hot-extrusion. Milling for 60h resulted in a powder alloy microstructure composed mostly of nanocrystalline Al and amorphous phase. Heat treatment of such powder resulted in the formation of Al and also the equilibrium intermetallic Al3Nb and Al13Fe4 phases. The alloy powders have been hot extruded at 480°C and the microstructure of the consolidated alloy was composed of the three equilibrium phases, Al, Al3Nb and Al13Fe4. The microstructure, which was formed by very fine and also sub-micrometric crystals resulted in yield stress values in compression tests at room temperature near 740MPa, associated with elongation of about 10%.

引用

页码：287 / 292

共 50 条

[41] Effect of Nb/W Ratio on Fe2 (Nb, W) Laves Phase Formation in Fe-Cr-Al-Nb-W Alloy
Yamagata, Ryosuke
Yoshimi, Kyosuke
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2016, 80 (10) : 646 - 654
[42] Structure and phase composition of Fe3Al alloy powder prepared by milling
Zak, T.
Schneeweiss, O.
Cochnar, Z.
Buchal, A.
Materials Science and Engineering A, 1991, A141 (01) : 73 - 78
[43] Production of Al-Fe-Nb-Si alloys by mechanical alloying and hot extrusion
Coelho, RE
Filho, FA
ADVANCED POWDER TECHNOLOGY II, 2001, 189-1 : 555 - 560
[44] Diffusion of Al during hot consolidation of FeAl
Skoglund, Helena
Knutson-Wedel, Maria
Karlsson, Birger
ACTA MATERIALIA, 2006, 54 (15) : 3853 - 3861
[45] Hot deformation characteristics and processing map of Ti-25Al-14Nb-2Mo-1Fe alloy under hot working process conditions
Zhou, Xuan
Fu, Li
Cheng, Jun
Mao, Yong
MATERIALS LETTERS, 2023, 342
[46] Hot deformation mechanisms in Ti-5.5Al-1Fe alloy
V. V. Balasubrahmanyam
Y. V. R. K. Prasad
Journal of Materials Engineering and Performance, 2001, 10 : 731 - 739
[47] Hot deformation mechanisms in Ti-5.5Al-1Fe alloy
Balasubrahmanyam, VV
Prasad, YVRK
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (06) : 731 - 739
[48] Hot deformation and processing maps of an Fe3Al intermetallic alloy
Lyszkowski, R.
Bystrzycki, J.
INTERMETALLICS, 2006, 14 (10-11) : 1231 - 1237
[49] Characterization of nanocrystalline Al-based alloy produced by mechanical milling followed by cold-pressing consolidation
Azabou, Maryam
Khitouni, Mohamed
Kolsi, Abdelwaheb
MATERIALS CHARACTERIZATION, 2009, 60 (06) : 499 - 505
[50] Fe-Al-Nb phase diagram investigation and directional growth of the (Fe,Al)2Nb-(Fe, Al, Nb)ss eutectic system
Mota, MA
Coelho, AA
Bejarano, JMZ
Gama, S
Caram, R
JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 399 (1-2) : 196 - 201

← 1 2 3 4 5 →