A novel adaptive differential line protection principle

被引：0
|
作者：
Liu K. [1 ]
Li Y. [2 ]
Brncic I. [3 ]
Shi Z. [3 ]
Wang J. [2 ]
机构：
[1] ABB Corporate Research China, Chaoyang District, Beijing
[2] ABB Corporate Research Sweden, Vasteras
[3] ABB Substation Automation Products, Vasteras
来源：
| 1600年 / Chinese Society for Electrical Engineering卷 / 36期
关键词：
Adaptive protection; CT saturation; Differential protection; Fault component; Phase angle difference; Transmission line;
D O I：
10.13334/j.0258-8013.pcsee.151054
中图分类号：
学科分类号：
摘要：
Differential current protection has been widely used for the line as main protection. Conventional differential current protection has relatively lower sensitivity because of charging current and heavy load; and may mal-trip for external faults with CT saturation, and the additional methods to avoid mal-operation from CT saturation may slow down the operation speed and sensitivity. Adaptive line differential protection enhanced by phase angle was proposed, which achieves good balance among high sensitivity, fast operation speed and high security. Proposed protection principle is immune to charging current and CT saturation, and has fast operation speed with small value of the operate time dispersion. PSCAD/Matlab simulation verifies the validity of proposed principle. © 2016 Chin. Soc. for Elec. Eng.
引用
收藏
页码：3440 / 3450
页数：10
相关论文
共 27 条
  • [1] Tang J., Wang X., Sang B., Improvement on restraining characteristic of a dispersed phase current differential protection criterion using steady currents, Automation of Electric Power Systems, 32, 11, pp. 44-48, (2008)
  • [2] Tang J., Wang X., Current differential protection criterion using steady currents for heavy-load line with high fault resistance, Proceedingss of the CSEE, 28, 4, pp. 72-77, (2008)
  • [3] Sun S.C., Ray R.E., A current differential relay system using fiber optics communication, IEEE Transactions on Power Apparatus and Systems, 102, 2, pp. 410-419, (2005)
  • [4] Wu Y., Yuan B., Split-phase current differential protection using fault components, Power System Protection and Control, 24, 3, (1996)
  • [5] Yin X., Chen D., Zhang Z., Fault component based digital differential protection, Automation of Electric Power Systems, 23, 11, pp. 13-17, (1999)
  • [6] Li B., Fan R., Yu X., A novel principle of phase related current differential protection, Proceedings of the CSEE, 31, 7, pp. 96-101, (2011)
  • [7] Liu K., Capacitive current compensation method for differential protection of EHV/UHV lines, Electric Power Automation Equipment, 31, 8, pp. 94-98, (2011)
  • [8] Bi T., Yu Y., Huang S., Et al., Novel accurate compensation method of capacitance current of UHV transmission line, Automation of Electric Power Systems, 29, 15, pp. 30-34, (2005)
  • [9] Wu T., Zheng Y., Zhu X., Current differential protection based on transient capacitance current compensation, Automation of Electric Power Systems, 29, 12, pp. 61-67, (2005)
  • [10] Suonan J., Yang C., Yang Z., Et al., Study of time-domain compensation algorithm of capacitive current for parallel transmission lines protection, Proceedings of the CSEE, 30, 1, pp. 77-81, (2010)
123