Effect of preheating temperature on post-weld residual stress of dissimilar steel plates

被引：0
|
作者：
Fu, H. [1 ]
Xu, B. [1 ]
Xiao, Q. [2 ]
Li, S. [2 ]
Zhang, X. [3 ]
Bian, S. [3 ]
Kang, T. [4 ]
机构：
[1] College of Metallurgy and Energy, North China University of Science and Technology, Tangshan,Hebei, China
[2] Key Laboratory of metallurgical engineering, University of Science and Technology Liaoning, Anshan,Liaoning, China
[3] China
[4] 725 Research Institute of China, Shipbuilding Heavy Industry Group Corporation, China
来源：
Metalurgija | 2020年 / 59卷 / 02期
关键词：
Computer software - Welding - Numerical models - Preheating - Welds;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Based on the numerical simulation software Visual-Environment, the numerical calculation and analysis of residual stress field under different preheating temperatures for Q345/2Cr13 dissimilar plate welding were carried out in this paper. The effects of different preheating temperatures on post-weld residual stress were mainly studied. The results showed that different preheating temperatures have little effect on the lateral residual stress, while the longitudinal residual stress and the initial and end of the weld have greater impacts. For residual stress difference between the two base metals should not be too high, the dissimilar plate welding should adopt a moderate preheating temperature. © 2020, Faculty of Metallurgy. All rights reserved.
引用
收藏
页码：150 / 152
相关论文
共 50 条
  • [21] Residual stress modification by post-weld treatment and its beneficial effect on fatigue strength of welded structures
    Cheng, XH
    Fisher, JW
    Prask, HJ
    Gnäupel-Herold, T
    Yen, BT
    Roy, S
    INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (9-11) : 1259 - 1269
  • [22] Effect of post-weld heat treatment on residual stress in submerged-arc welds of 20MnNiMo steel heavy plate
    Chi, Lu-Xin
    Chen, Zhong-Yi
    Ma, Yong-Lin
    Xing, Shu-Qing
    Fang, Li-Xin
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2012, 33 (04): : 96 - 99
  • [23] Study on the Effect of Preheating Temperature on Residual Stress in Laser Arc Composite Welding of Dissimilar Aluminum Alloys
    Chen, Xiaowen
    Tang, Song
    Xie, Wanlin
    Zhang, Meng
    Song, Hao
    Ran, Qingzheng
    Zhang, Defen
    JOM, 2024, 76 (07) : 3832 - 3839
  • [24] Evolution of a low-alloy steel/nickel superalloy dissimilar metal weld during post-weld heat treatment
    C.V. da Silva Lima
    M. Verdier
    F. Robaut
    J. Ghanbaja
    G. Badinier
    T. Marlaud
    C. Tassin
    H.P. Van Landeghem
    Welding in the World, 2021, 65 : 1871 - 1885
  • [25] The effects of restraint and post-weld heat treatment on residual stress distribution in a bead-on-plate weld
    Paradowska, A. M.
    Price, J. W. H.
    Ibrahim, R.
    Finlayson, T. R.
    Ripley, M. I.
    Blevins, R.
    JOURNAL OF NEUTRON RESEARCH, 2007, 15 (3-4) : 231 - 241
  • [26] Evolution of a low-alloy steel/nickel superalloy dissimilar metal weld during post-weld heat treatment
    Lima, C. V. da Silva
    Verdier, M.
    Robaut, F.
    Ghanbaja, J.
    Badinier, G.
    Marlaud, T.
    Tassin, C.
    Van Landeghem, H. P.
    WELDING IN THE WORLD, 2021, 65 (10) : 1871 - 1885
  • [27] Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Dissimilar Metal Weld Used in Power Plants
    F. C. Liu
    T. W. Nelson
    S. L. McCracken
    Metallurgical and Materials Transactions A, 2019, 50 : 2826 - 2834
  • [28] Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Dissimilar Metal Weld Used in Power Plants
    Liu, F. C.
    Nelson, T. W.
    McCracken, S. L.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (06): : 2826 - 2834
  • [29] Effects of post-weld heat treatment on dissimilar laser welded joints of austenitic stainless steel to low carbon steel
    Prabakaran, M. P.
    Kannan, G. R.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 191
  • [30] Residual Stress Measurements in Dissimilar Weld Metal
    M. D. Olson
    M. R. Hill
    B. Clausen
    M. Steinzig
    T. M. Holden
    Experimental Mechanics, 2015, 55 : 1093 - 1103
12345