The design of the drive system of the crank underdrive quick presses

被引：0
|
作者：
机构：
[1] [1,Maohua, Xiao
[2] Fei, Yang
[3] Zunmang, Ke
[4] Sihong, Zhu
[5] Dengsong, Xiao
来源：
| 1600年 / Trans Tech Publications Ltd卷 / 584期
关键词：
Crankshafts;
D O I：
10.4028/www.scientific.net/KEM.584.189
中图分类号：
学科分类号：
摘要：
Based on production needs, a main transmission mechanism of underdrive speed press was designed in this paper. The design of the main transmission mechanism is the improvements and alternative of sine institutions slider-crank mechanism made. Underdrive and dual slider mechanism were designed, in order to achieve the presses punching process. The nominal pressure angle and the nominal torque were calculated. A preliminary calculation and design of the crankshaft, bearings, slider of the main drive mechanism. Ensure reliable operation and to provide a basis for the optimization design. Copyright © 2014 Trans Tech Publications, Switzerland.
引用
收藏
相关论文
共 50 条
  • [21] DEVICES FOR FORGING CRANKSHAFTS ON HYDRAULIC, CRANK AND ACCENTRIC PRESSES
    RUT, T
    RUSSIAN ENGINEERING JOURNAL, 1979, 59 (12): : 45 - 47
  • [22] Design of a hand water pump using a quick-return crank mechanism
    Okoronkwo, C. A.
    Ezurikc, B. O.
    Uche, R.
    Igbokwe, J. O.
    Oguoma, O. N.
    AFRICAN JOURNAL OF SCIENCE TECHNOLOGY INNOVATION & DEVELOPMENT, 2016, 8 (03): : 292 - 298
  • [23] COMPUTATION OF FIXED AXLE FOR CRANK CAMS OF LARGE PRESSES
    MULLER, S
    MASCHINENBAUTECHNIK, 1974, 23 (08): : 360 - 363
  • [24] Direct-drive presses
    Anon
    Paper, Film and Foil Converter, 2002, 76 (01):
  • [25] POINTS OF VIEW ABOUT CONSTRUCTION OF CRANK-DRIVEN PRESSES AND C CUPPING PROCESS PRESSES
    MULLER, S
    MASCHINENBAU TECHNIK, 1972, 21 (04): : 175 - &
  • [26] QUICK DRIVE
    Thilmany, Jean
    MECHANICAL ENGINEERING, 2010, 132 (08) : 18 - 18
  • [27] STAGGERING SCREENS WITH CRANK DRIVE
    SCHMIDT, P
    CHEMISCHE TECHNIK, 1969, 21 (04): : 220 - &
  • [28] On choosing conception of heavy hot-forming crank presses
    Kruk, A.T.
    Fedorkevich, V.F.
    Kuznechno-Shtampovochnoe Proizvodstvo, 1999, (07): : 36 - 39
  • [29] Thickness of die sets for hot-stamping crank presses
    Tomov, B.I.
    Kolev, D.K.
    Soviet Forging and Sheet Metal Stamping Technology (English Translation of Kuznechno-Shtampovochnoe Proizvodstvo), 1988, (02): : 68 - 71
  • [30] Operating Capacity of Crank Presses and Hammers for Drop Forging.
    Gottfried, Rau
    Werkstatt und Betrieb, 1979, 112 (04): : 259 - 262
12345