Fabrication of tic-reinforced surface layers on ductile cast iron substrate by laser surface alloying

被引：3

作者：

Janicki D. ^{[1
]}

机构：

[1] Silesian University of Technology, Faculty of Mechanical Engineering, Welding Department, Konarskiego Street 18A, Gliwice

来源：

Solid State Phenomena | 2020年 / 308卷

关键词：

Computational thermodynamics; Ductile cast iron; In-situ composite; Laser surface alloying; Titanium carbide;

D O I：

10.4028/www.scientific.net/SSP.308.76

中图分类号：

学科分类号：

摘要：

This chapter presents a novel method for analysis and optimization of the in-situ formation of TiC-reinforced composite surface layers (TRL) on a ductile cast iron substrate during the laser surface alloying process, combining the experimental approach with the computational thermodynamics. The microstructure of the TRLs has been assessed by light optical microscopy, scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction. The results of thermodynamic calculations with the Scheil-Gulliver model showed a good agreement with the experimental results, indicating that the actual solidification path for the analyzed Fe-C-Si-Ti alloy systems under the investigated range of laser processing conditions is close to the Scheil-Gulliver assumption. © 2020 Trans Tech Publications Ltd, Switzerland.

引用

页码：76 / 99

页数：23

共 50 条

[1] Effect of Cooling Rate on Microstructure of In Situ TiC-Reinforced Composite Surface Layers Synthesized on Ductile Cast Iron by Laser Alloying
Janicki, Damian
Czuprynski, Artur
Gorka, Jacek
Matus, Krzysztof
MATERIALS, 2024, 17 (04)
[2] Fabrication of high chromium white iron surface layers on ductile cast iron substrate by laser surface alloying
Silesian University of Technology, Faculty of Mechanical Engineering, Konarskiego 18A, Gliwice, Poland
Stroj Vest, 12 (705-714):
[3] Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
Janicki, Damian
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2017, 63 (12): : 705 - 714
[4] Effect of Chromium and Molybdenum Addition on the Microstructure of In Situ TiC-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying
Janicki, Damian
MATERIALS, 2020, 13 (24) : 1 - 17
[5] Microstructure and Sliding Wear Behaviour of In-Situ TiC-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying
Janicki, Damian
MATERIALS, 2018, 11 (01):
[6] The Laser Alloying Process of Ductile Cast Iron Surface with Titanium
Kotarska, Aleksandra
METALS, 2021, 11 (02) : 1 - 13
[7] The friction and wear behaviour of in-situ titanium carbide reinforced composite layers manufactured on ductile cast iron by laser surface alloying
Janicki, Damian
SURFACE & COATINGS TECHNOLOGY, 2021, 406
[8] MICROSTRUCTURAL EVOLUTION DURING LASER SURFACE ALLOYING OF DUCTILE CAST IRON WITH TITANIUM
Janicki, D.
ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (04) : 2425 - 2431
[9] TiC reinforced steel matrix composite layers produced by laser surface alloying
Fernandez-Vicente, A.
Castro, G.
Arias, J. L.
Montealegre, M. A.
1ST INTERNATIONAL CONFERENCE ON NEW MATERIALS FOR EXTREME ENVIRONMENTS, 2009, 59 : 55 - 61
[10] The Laser Alloying Process of Ductile Cast Iron Surface with Titanium Powder in Nitrogen Atmosphere
Lont, Aleksandra
Gorka, Jacek
Janicki, Damian
Matus, Krzysztof
COATINGS, 2022, 12 (02)

← 1 2 3 4 5 →