Investigation of thermo-chemical polishing of CVD diamond film

被引：0
|
作者：
Chou, W.C. [1 ]
Chao, C.L. [1 ]
Chien, H.H. [2 ]
Ma, K.J. [3 ]
Lin, H.Y. [3 ]
机构：
[1] Department of Mechanical and Electro-Mechanical Engineering, Tam-Kang University, No.151 Ying-Chuan Road, Tamsui, Taipei Hsien-251, Taiwan
[2] Department of Mechanical Engineering, Chung-Hua University, Hsin-Chu, 30067, Taiwan
[3] MIRL, Industrial Technology Research Institute, Chu-Tung, Hsin-Chu, Taiwan
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
Chemical polishing - Diamonds - Single crystals - Zinc oxide;
D O I：
10.4028/0-87849-416-2.195
中图分类号：
学科分类号：
摘要：
ZnO/Diamond structure has attracted a lot of attentions and heavy investment recently just because diamond has the capability of producing very high surface acoustic wave (around 10,000m/s). In this present study, the microwave chemical vapor deposition (CVD) method was employed to produce diamond films on silicon single crystal. Thermo-chemical polishing experiments were then conducted on the obtained diamond films. The underlying material removal mechanisms, microstructure of the machined surface and related machining conditions were also investigated. Thermo-chemical polishing was proved to be able to remove the diamond film very effectively (4.8μm deep of diamond film was removed in 30 minutes when polishing at 550°C and 5.7m/s). The material removal rate was increased with polishing speed and pressure. Higher polishing temperature would improve the chemical reaction and result in better surface finish.
引用
收藏
页码：195 / 200
相关论文
共 50 条
  • [1] Thermo-chemical polishing of large area CVD diamond films
    Liu, J.M.
    Jiang, Z.
    Zhang, H.D.
    Lu, F.X.
    Tang, W.Z.
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2001, 23 (01):
  • [2] Thermo-chemical polishing of CVD diamond thin film by wire brush - Effect of brushing speed and heating by hot air
    Fujimaki, Kengo
    Yokosawa, Tsuyoshi
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2012, 78 (01): : 81 - 85
  • [3] Investigation of the thermal-chemical polishing and laser ablation of CVD diamond film
    Chao, CL
    Ma, KJ
    Hung, JY
    Liu, YH
    Chen, TT
    Chen, YT
    Lin, HY
    PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2002, : 35 - 40
  • [4] Thermo-chemical polishing of diamond cutting tool based on carbon diffusion
    Furushiro N.
    Higuchi M.
    Yamaguchi T.
    Sugimoto T.
    Shimada S.
    Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2010, 76 (764): : 974 - 980
  • [5] Polishing of single point diamond tool based on thermo-chemical reaction with copper
    Furushiro, Naomichi
    Higuchi, Masahiro
    Yamaguchi, Tomomi
    Shimada, Shoichi
    Obata, Kazushi
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2009, 33 (04): : 486 - 491
  • [6] Thermo-chemical dressing of diamond grinding wheels
    Definiert abgerichtete Diamantschleifscheiben
    1600, VDI Fachmedien GmBH & Co. KG (104):
  • [7] Investigation into polishing process of CVD diamond films
    Guo, ZN
    Wang, CY
    Kuang, TC
    MATERIALS AND MANUFACTURING PROCESSES, 2002, 17 (01) : 45 - 55
  • [8] Surface uniformity of CVD diamond film polishing by catalytic polishing method
    Zhou, Difeng
    Zheng, Xiulian
    Ruan, Chen
    Zhang, Li
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY III, 2013, 546 : 102 - +
  • [9] CVD Diamond Film Polishing based on Accelerant Theory
    Zhang Li
    Ding Shao-jie
    Wen Dong-hui
    Xu Zhen-hao
    Ji Shi-ming
    ULTRA-PRECISION MACHINING TECHNOLOGIES, 2012, 497 : 185 - 189
  • [10] Study on the polishing of CVD diamond film by electromachining method
    Jingangshi yu Moliao Moju Gongcheng/Diamond & Abrasives Engineering, 2000, (06): : 6 - 9
12345