Review on Engineering Application Status of Gob-Side Entry Retaining Technology in China

被引：0
|
作者：
Zhao, Yiming [1 ,2 ]
Dai, Jingchen [1 ,2 ]
Chang, Qingliang [1 ,2 ]
机构：
[1] China Univ Min & Technol, Sch Mines, Xuzhou 221116, Peoples R China
[2] China Univ Min & Technol, Key Lab Deep Coal Resource Min, Minist Educ, Xuzhou 221116, Peoples R China
来源：
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 19期
基金：
中国国家自然科学基金;
关键词：
gob-side entry retaining; practice case; applicable conditions; technical parameters; FLOOR;
D O I：
10.3390/app14198888
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Gob-side entry retaining (GSER) technology has been widely used in underground coal mines. However, the applicable conditions of GSER technology in practical engineering still need further clarification to prevent the safety hazards and significant economic losses caused by its failure. In this study, 587 application cases of GSER in China from 2000 to 2024 were collected, and the relevant data, such as geological conditions and key technical parameters of GSER projects and their impact on engineering practices, were systematically analyzed. Considering the technical characteristics and the developing status of GSER technology, the current status of the application of GSER engineering in the mining areas of China was obtained, and then the applicable geological conditions and optimal technical parameters for the effective implementation of GSER technology were identified. Additionally, the existing technical challenges and further prospects of GSER technology were illustrated. This study provides a reference for reasonable applications and further research of GSER technology.
引用
收藏
页数：15
相关论文
共 50 条
  • [41] Study and Application on the Parameters of Gob-side Entry Retaining in Thin Seam with Limestone Roof
    Guo, Zhongping
    Qi, Jiali
    Duan, Huiqiang
    NATURAL RESOURCES AND SUSTAINABLE DEVELOPMENT, PTS 1-3, 2012, 361-363 : 193 - +
  • [42] Bearing behavior of block wall structure in gob-side entry retaining and its application
    Zhang, N. (zhangnong@126.com), 1600, China University of Mining and Technology (30):
  • [43] Energy-accumulated directional blasting technology and its application in gob-side entry retaining by roof cutting
    Chen, Shangyuan
    Jiao, Tong
    Lv, Qian
    Hu, Jinzhu
    Wang, Zhenkang
    ENERGY EXPLORATION & EXPLOITATION, 2025,
  • [44] Application of Gob-Side Entry Driving in Fully Mechanized Caving Mining: A Review of Theory and Technology
    Chen, Dongdong
    Zhu, Jingkun
    Ye, Qiucheng
    Ma, Xiang
    Xie, Shengrong
    Guo, Wenke
    Li, Zijian
    Wang, Zhiqiang
    Feng, Shaohua
    Yan, Xiangxiang
    ENERGIES, 2023, 16 (06)
  • [45] Mechanical Model and Control Technology of Roadside Gangues in Gob-Side Entry Retaining by Roof Cutting
    Zhen Zhu
    Manchao He
    Xuchun Wang
    Hongping Yuan
    Geotechnical and Geological Engineering, 2020, 38 : 849 - 860
  • [46] Study on Gob-side Entry Retaining Technology with Roadway Anchor Net Waste Bag Wall
    Lin Dong-cai
    Jia Chuan-yang
    Luan Heng-jie
    3RD INTERNATIONAL WORKSHOP ON MINE HAZARDS PREVENTION AND CONTROL, 2013, 94 : 389 - 394
  • [47] The Floor Heave Mechanism and Control Technology of Gob-Side Entry Retaining of Soft Rock Floor
    Li, Zexin
    Zhang, Yidong
    Ma, Qi
    Zheng, Yu
    Song, Guangyuan
    Yan, Wanzi
    Zhang, Yu
    Hu, Lei
    SUSTAINABILITY, 2023, 15 (07)
  • [48] Mechanical Model and Control Technology of Roadside Gangues in Gob-Side Entry Retaining by Roof Cutting
    Zhu, Zhen
    He, Manchao
    Wang, Xuchun
    Yuan, Hongping
    GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2020, 38 (01) : 849 - 860
  • [49] Study on technology of gob-side entry retaining in thin seam surrounded by soft roof and floor
    Ju, Feng
    Sun, Qiang
    Huang, Peng
    He, Qi
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2014, 31 (06): : 914 - 919
  • [50] Feasibility Analysis of Gob-Side Entry Retaining in Steep Coal Seam
    Deng Yuehua
    Wang Shouquan
    Fan Yingchong
    Chen Xiankun
    2013 FOURTH INTERNATIONAL CONFERENCE ON DIGITAL MANUFACTURING AND AUTOMATION (ICDMA), 2013, : 608 - 611
12345