Kinetics of internal oxidation of Cu-Al alloy plate

被引：0

作者：

Song, Kexing ^{[1
,2
]}

Xing, Jiandong ^{[1
]}

Tian, Baohong ^{[2
]}

Liu, Ping ^{[2
]}

Dong, Qiming ^{[2
]}

机构：

[1] Sch. of Mat. Sci. and Eng., Xi'an Jiaotong Univ., Xi'an 710049, China

[2] Sch. of Mat. Sci. and Eng., Henan Univ. of Sci. and Technol., Luoyang 471003, China

来源：

Journal Wuhan University of Technology, Materials Science Edition | 2005年 / 20卷 / 01期

关键词：

D O I：

10.1007/bf02870863

中图分类号：

学科分类号：

摘要：

The kinetics of internal oxidation of dilute Cu-Al alloys, containing up to 2.214% molar fraction Al, was investigated over the temperature range of 1023 K to 1273 K, and the depth of internal oxidation was measured by microscopies. A modified rate equation was derived to describe the kinetics of internal oxidation of Cu-Al alloy plate. Based on the derived equation, the permeability of oxygen in solid copper was obtained from the internal oxidation measurements. The experimental results show that the depth of the internal oxidation is a parabolic function of time, there is no evidence for preferential diffusion along grain boundaries and an outer layer of pure copper was formed on the external surface of samples.

引用

页码：13 / 16

共 50 条

[21] Comparative analysis of internal oxidation microstructure of Cu-Al alloy with different Al content
School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang , China
不详
Ren, Feng-Zhang, 1600, Editorial Office of Transactions of Materials and Heat Treatment (35):
[22] Internal oxidation of dilute Cu-Al alloy powers with oxidant of Cu2O
Song, KX
Xing, JD
Dong, QM
Liu, P
Tian, BH
Cao, XJ
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 380 (1-2): : 117 - 122
[23] Microstructure and properties of Al2O3/Cu composites prepared by internal oxidation of Cu-Al alloy
Henan University of Science and Technology, Luoyang, China
不详
Tezhong Zhuzao Ji Youse Hejin, 2007, 2 (142-146):
[24] Internal oxidation of Cu-Al alloy and fabrication of nanometer Al2O3p/Cu composites
Shen, YT
Cui, CX
Shen, YF
Xu, YJ
Zhang, LS
MECHANICS AND MATERIAL ENGINEERING FOR SCIENCE AND EXPERIMENTS, 2001, : 138 - 141
[25] Preparation of Al2O3/Cu composites by internal oxidation in Cu-Al alloy sheet processing
Wu, Rui
Zhang, Danwen
Sun, Juan
Ren, Fengzhang
He, Qingchuan
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2034 - 2039
[26] On better understanding of dispersion-separation mechanism in internal oxidation of aluminum in Cu-Al alloy
Zhou, Guohong
Li, Hualun
Hu, Rui
Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University, 2002, 20 (02): : 176 - 179
[27] Microstructural changes during internal carburization of Cu-Al alloy
Anzel, I
Rudolf, R
Krizman, A
Kneissl, A
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2002, 39 (08): : 401 - 413
[28] EFFECTS OF AL CONCENTRATION AND INTERNAL OXIDATION TEMPERATURE ON THE MICROSTRUCTURE OF DILUTE CU-AL ALLOYS AFTER INTERNAL OXIDATION
TAKAHASHI, T
HASHIMOTO, Y
KOYAMA, K
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1989, 53 (08) : 814 - 820
[29] Dependence of internal oxidation rate of water atomized Cu-Al alloy powders on oxygen partial pressure
Correia, JB
Caldas, MP
Shohoji, N
Ferro, AC
JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (06) : 465 - 468
[30] KINETICS OF ISOTHERMAL AND ISOVELOCITY PEARLITE GROWTH IN CU-AL EUTECTOID ALLOY
CHEETHAM, D
RIDLEY, N
METALLURGICAL TRANSACTIONS, 1973, 4 (11): : 2549 - 2556

← 1 2 3 4 5 →