Design and Experimental Study of Aerodynamic Drag Reduction for Cabin-over-engine Trucks

被引：0

作者：

Zhuang C. ^{[1
,2
]}

Wang H. ^{[1
,2
]}

Wang X. ^{[4
]}

Wang M. ^{[3
]}

Zhang Y. ^{[4
]}

机构：

[1] State Key Laboratory of Intelligent Manufacturing of Advanced Construction Machinery, Xuzhou

[2] Jiangsu XCMG State Key Laboratory Technology Co. ，Ltd., Xuzhou

[3] Technology Center, Xuzhou Xugong Automobile Manufacturing Co. ，Ltd., Xuzhou

[4] State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun

来源：

Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences | 2023年 / 50卷 / 06期

基金：

中国国家自然科学基金;

关键词：

cabin-over-engine trucks; drag reduction; truck drag reduction accessories; wind tunnel;

D O I：

10.16339/j.cnki.hdxbzkb.2023168

中图分类号：

学科分类号：

摘要：

To improve the aerodynamic characteristics of a cabin-over-engine truck and reduce wind resistance，the contribution of different components to the drag coefficient was studied through the wind tunnel test of the truck. It was found that the air deflector，neckline plate，rearview mirror and side skirt contributed greatly to the drag coefficient. According to the aerodynamic principle，aerodynamic drag reduction optimization design is carried out for the parts which make a great contribution to the drag coefficient such as the air deflector，and the drag reduction effect is verified by experiments. The flow field in the front of the truck is improved through the modification design of the rearview mirror and air deflector，and the flow field in the rear of the truck is improved through the parameter combination design of the deflector at the rear of the cargo box. Finally，the schemes with good drag reduction effect of each component are combined. The wind tunnel test results show that the aerodynamic performance of the truck body has been significantly improved through the aerodynamic drag reduction design. Compared with the initial model，the drag reduction effect of the optimal aerodynamic performance combination scheme is about 7%. © 2023 Hunan University. All rights reserved.

引用

页码：45 / 52

页数：7

共 15 条

[11] ZHANG Y, SHI J Q，, GU Z Q, Study on interaction influence of tail characteristic parameters on aerodynamic drag and global optimization, Journal of Hunan University（Natural Sciences）, 47, 2, pp. 14-20, (2020)
[12] IBRAHIM M，, AGELIN-CHAAB M., Investigation and development of underbody aerodynamic drag reduction devices for trailer trucks［R］, (2018)
[13] MUKKAMALA Y., Analyzing the profile modification of truck-trailer to prune the aerodynamic drag and its repercussion on fuel Consumption ［J］, Procedia Engineering, 97, pp. 1208-1219, (2014)
[14] Aerodynamic drag reduction of a light truck - from conceptual design to full scale road tests［R］
[15] WANG Q Y, HUANG W P，, LAI C G，, Et al., Study on aerodynamic drag reduction of a heavy truck based on aerodynamic accessories［J］, Automotive Engineering, 42, 6, pp. 746-752, (2020)

← 1 2 →