Research on flame retardant plywood with different flame retardants

被引：4

作者：

Liu Y. ^{[1
]}

Xu J.-X. ^{[1
]}

Wen M.-Y. ^{[1
]}

Park H.-J. ^{[2
]}

Zhu J.-Z. ^{[3
]}

Liu Y.-N. ^{[4
]}

机构：

[1] Department of Wood Material Science and Engineering Key Laboratory, College of Materials Science and Engineering, Beihua University, Jilin Province, Jilin-city

[2] Department of Housing Environmental Design, and Research Institute of Human Ecology, College of Human Ecology, Jeonbuk National University, Jeonbuk

[3] Qingdao Water Consservancy Survey and Design Institute Co. Ltd., Shandong Province, Jinan-city

[4] Department of Furniture Design and Engineering, College of Chemistry and Materials, Zhejiang A&F University, Zhejiang Province, Hangzhou

来源：

Journal of the Korean Wood Science and Technology | 2021年 / 49卷 / 06期

基金：

中国国家自然科学基金;

关键词：

Bonding strength; Curing time; Flame retardant plywood; Formaldehyde emission; Phosphorous nitrogen flame retardant; Urea-formaldehyde resins;

D O I：

10.5658/WOOD.2021.49.6.667

中图分类号：

学科分类号：

摘要：

The flame retardancy of plywood should be improved as much as possible while minimizing the impact on the bonding strength of plywood. Six commercial flame retardants and three laboratory synthesized phosphorous nitrogen flame retardants were selected. E0, E1 and E2 grade commercial formaldehyde resins (UF) were applied in this study to evaluate the effect of different flame retardants on the curing time of resin, bonding strength, flame retardant performance, and formaldehyde emission of plywood. The results show that the effect of the addition of different flame retardants on the bonding strength of plywood gradually decreased with the increase of the formaldehyde molar ratio of the resin. The effect of flame retardants on the curing time of UF gradually decreased as the mole ratio of formaldehyde increasing, while the amount of formaldehyde emission varied according to the content of formaldehyde in the flame retardant. Compared with plywood without flame retardant, flame retardant of plywood added with phosphorous nitrogen flame retardant was improved. © 2021, Korean Society of Wood Science Technology. All rights reserved.

引用

页码：667 / 678

页数：11

共 50 条

[21] Research progress of triazine flame retardants
Wang, Jingsong
Yu, Shouwu
Xiao, Shujuan
MACROMOLECULAR RESEARCH, 2023, 31 (04) : 339 - 357
[22] Research progress of triazine flame retardants
Jingsong Wang
Shouwu Yu
Shujuan Xiao
Macromolecular Research, 2023, 31 : 339 - 357
[23] Effect of flame retardants on flame retardant, mechanical, and thermal properties of sisal fiber/polypropylene composites
Jeencham, Rachasit
Suppakarn, Nitinat
Jarukumjorn, Kasama
COMPOSITES PART B-ENGINEERING, 2014, 56 : 249 - 253
[24] Study on the mechanical and flame-retardant properties of PP/EPDM/flame-retardants blends
Wu, Dezhen
Mao, Lixin
Tan, Xinhua
Chen, Ronghu
Jin, Riguang
Beijing Huagong Daxue Xuebao(Ziran Kexueban)/Journal of Beijing University of Chemical Technology, 26 (02): : 27 - 29
[25] Mechanical Properties of Polypropylene-Based Flame Retardant Composites by Surface Modification of Flame Retardants
Lee, Jinwoo
Park, Jae Hyung
Shim, Seung Bo
Lee, Ji Eun
POLYMERS, 2022, 14 (17)
[26] Synthesis of phosphorus-containing flame retardants and investigation of their flame retardant behavior in textile applications
Kanat, Muhammed
Eren, Tarik
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (36)
[27] FLAME RETARDANT FINISHING AND FLAME RETARDANT TEXTILES
Yang, Charles Q.
Weil, Edward D.
ITC&DC: 5TH INTERNATIONAL TEXTILE, CLOTHING & DESIGN CONFERENCE 2010, BOOK OF PROCEEDINGS: MAGIC WORLD OF TEXTILES, 2010, : 424 - 432
[28] EVALUATION OF FLAME RETARDANT IMPREGNATION IN PERFORATED HINOKI (CHAMAECYPARIS OBTUSA) PLYWOOD
Jang, Eun-Suk
Yong, Woo -Jong
Jo, Seok-Un
Kang, Chun -Won
Park, Hee-Jun
WOOD AND FIBER SCIENCE, 2024, 56 (01): : 43 - 50
[29] Flame retardants
2001, Society of Plastics Engineers (57)
[30] Flame retardants
Stewart, Richard
2003, Society of Plastics Engineers (59)

← 1 2 3 4 5 →