Laser soldering of piezoelectric ceramic transformer

被引：0

作者：

He, Yunfeng ^{[1
]}

Du, Dong ^{[1
]}

Chen, Qiang ^{[1
]}

Sui, Bo ^{[1
]}

Xiong, Lijuan ^{[1
]}

机构：

[1] Dept. of Mech. Eng., Tsinghua Univ., Beijing 100084, China

来源：

Qinghua Daxue Xuebao/Journal of Tsinghua University | 2002年 / 42卷 / 04期

关键词：

Ceramic products - Computer simulation - Finite element method - Laser beam welding - Piezoelectric materials - Soldering - Temperature distribution;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Laser soldering was used to correct joint problems in the lateral electrodes of piezoelectric ceramic transformer (PECT). Wire-mesh and soldering paste were used to weld te lateral electrode of a PECT. The joint problem in multilayer heterogeneous lamination was corrected with this process so that the PECT were connected very well and were not affected much by heat. A three-dimensional model was developed for the laser soldering temperature field in multilayer materials. A simplified model was used for efficient finite element analysis to investigate the temperature distribution characteristics in laser soldiering. The results were verified experimentally. The analysis of the temperature field distribution during laser soldering will accelerate the application of PECT and will be a reference for similar problems.

引用

页码：494 / 497

共 50 条

[21] Piezoelectric ceramic transformer using radial vibration mode disks
Sakurai, K
Shindou, S
Ohnishi, K
Tomikawa, Y
1998 IEEE ULTRASONICS SYMPOSIUM - PROCEEDINGS, VOLS 1 AND 2, 1998, : 939 - 944
[22] Piezoelectric ceramic transformer with the suppression of the 2nd harmonic vibration
Asada, Takaaki
Takatsuka, Akiteru
Journal of the Acoustical Society of Japan (E) (English translation of Nippon Onkyo Gakkaishi), 2000, 21 (05): : 271 - 273
[23] AN ADVANCED DESIGN OF PIEZOELECTRIC CERAMIC TRANSFORMER FOR HIGH-VOLTAGE SOURCE
HIROSE, S
SHIMIZU, H
IEEE 1989 ULTRASONICS SYMPOSIUM : PROCEEDINGS, VOLS 1 AND 2, 1989, : 471 - 475
[24] A photomultiplier high voltage power supply incorporating a piezoelectric ceramic transformer
Imori, M
Taniguchi, T
Matsumoto, H
Sakai, T
IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1996, 43 (03) : 1427 - 1431
[25] Analysis on the Ring-Type Piezoelectric Ceramic Transformer in Radial Vibration
Lin, Shuyu
Xu, Jie
Cao, Hui
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2016, 31 (07) : 5079 - 5088
[26] MECHANISMS OF INTERNAL-FRICTION AND MECHANICAL FRACTURE IN PIEZOELECTRIC CERAMIC TRANSFORMER
IKUSHIMA, H
OHJI, K
FERROELECTRICS, 1978, 19 (3-4) : 170 - 170
[27] Recent developments in low-fired piezoelectric ceramic multilayer transformer
Li, LT
Chu, XC
Gui, ZL
CERAMIC MATERIALS AND MULTILAYER ELECTRONIC DEVICES, 2003, 150 : 351 - 358
[28] Analysis of a ceramic plate thickness-twist mode piezoelectric transformer
Xu, Limei
Wu, Han
Fan, Hui
Xiao, Zhongmin
Yang, Jiashi
INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2008, 28 (04) : 455 - 467
[29] PIEZOELECTRIC CERAMIC TRANSFORMER HIGH-VOLTAGE POWER-SUPPLY
KUANG, AX
CHAI, LY
HU, GH
PAN, SN
ZHOU, TS
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 1986, 33 (06) : 824 - 824
[30] STUDY ON THE NEW TYPE OF DUAL OUTPUT OF SINGLE DISC PIEZOELECTRIC CERAMIC TRANSFORMER
Li, Guo
Lin, Shu-yu
2013 SYMPOSIUM ON PIEZOELECTRICITY, ACOUSTIC WAVES AND DEVICE APPLICATIONS (SPAWDA), 2013, : 20 - 23

← 1 2 3 4 5 →