Effect of main flow orientation angle on cooling characteristics of single row of cylindrical film cooling holes

被引：0
|
作者：
20151000594407
机构：
[1] Nie, Jian-Hao
[2] Zhu, Hui-Ren
来源：
| 2015年 / Beijing University of Aeronautics and Astronautics (BUAA)卷 / 30期
关键词：
Film cooling;
D O I：
10.13224/j.cnki.jasp.2015.01.009
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [11] THE FLOW AND FILM COOLING EFFECTIVENESS FOLLOWING INJECTION THROUGH A ROW OF HOLES
    FOSTER, NW
    LAMPARD, D
    JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1980, 102 (03): : 584 - 588
  • [12] Computational Investigation of Film Cooling from Cylindrical and Row Trenched Cooling Holes near the Combustor End wall
    Sidik, Nor Azwadi Che
    Kianpour, Ehsan
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 225 - 229
  • [13] Experimental study of film cooling on a rotating model with a single row of holes
    Yang, Bin
    Xu, Guoqiang
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2010, 31 (08): : 1524 - 1537
  • [14] EFFECT OF WAKE ON ENDWALL FILM COOLING EFFECTIVENESS FOR A ROW OF CYLINDRICAL HOLES NEAR THE STAGNATION REGION OF AN AIRFOIL
    Rodriguez, S.
    Kersten, S.
    Krishnan, V.
    Kapat, J. S.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, : 1209 - 1218
  • [15] Analysis of upstream, double-row, cylindrical holes on primary and secondary effects of endwall flow and film cooling
    Luo, Ding
    Zhang, Ke
    Lei, Jiang
    Xie, Gongnan
    Wright, Lesley
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2020, 82
  • [16] MEASUREMENT OF FILM EFFECTIVENESS FOR CYLINDRICAL AND ROW TRENCHED COOLING HOLES AT DIFFERENT BLOWING RATIOS
    Kianpour, Ehsan
    Sidik, Nor Azwadi Che
    Golshokouh, Iman
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2014, 66 (10) : 1154 - 1171
  • [17] Film Cooling From a Row of Holes Supplemented With Antivortex Holes
    Dhungel, Alok
    Lu, Yiping
    Phillips, Wynn
    Ekkad, Srinath V.
    Heidmann, James
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2009, 131 (02):
  • [18] Enhanced film cooling performance of a row of cylindrical holes embedded in the saw tooth slot
    Li, Guang-chao
    Yang, Peng
    Zhang, Wei
    Wu, Zhuang
    Kou, Zhi-hai
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 132 : 1137 - 1151
  • [19] Internal wall-jet film cooling with compound angle cylindrical holes
    Shine, S. R.
    Kumar, S. Sunil
    Suresh, B. N.
    ENERGY CONVERSION AND MANAGEMENT, 2013, 68 : 54 - 62
  • [20] Numerical investigation of film cooling flow induced by cylindrical and shaped holes
    Barthet, S
    Kulisa, P
    HEAT TRANSFER IN GAS TURBINE SYSTEMS, 2001, 934 : 369 - 376
12345