Performance study of cryogenically treated HSS drills in drillilg gray cast iron using orthogonal array technique

被引：0
|
作者：
Ramji, B.R. [1 ]
Narasimha Murthy, H.N. [2 ]
Krishna, M. [2 ]
Raghu, M.J. [2 ]
机构：
[1] Department of Manufacturing Engineering, BMS College of Engineering, Bangalore, India
[2] Department of Mechanical Engineering, RV College of Engineering, Bangalore, India
来源：
Research Journal of Applied Sciences, Engineering and Technology | 2010年 / 2卷 / 05期
关键词：
Surface roughness;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：487 / 491
相关论文
共 36 条
  • [31] COMPARATIVE STUDY ON THE SINGLE LAYER DEPOSITION OF Ti ON GRAY CAST IRON AND LOW ALLOY STEEL MATRIX USING ELECTROSPARK DEPOSITION METHOD
    Nejneru, Carmen
    Perju, Manuela-Cristina
    Vizureanu, Petrica
    Axinte, Mihai
    MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II, 2012, : 665 - 668
  • [32] Experimental investigation on the performance of ceramics and CBN cutting materials during dry machining of cast iron: Modeling and optimization study using RSM, ANN, and GA
    Gasmi, Boutheyna
    Yallese, Mohamed Athmane
    Boucherit, Septi
    Chihaoui, Salim
    Mabrouki, Tarek
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (05) : 1397 - 1422
  • [33] Optimizing dry milling of stir-cast and heat-treated AZ80 magnesium alloy using multiple criteria optimization technique: an experimental study
    Selvan, M. Tamil
    Somasundaram, M.
    Annamalai, A. Raja
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [34] Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study
    Mishra, Purna Chandra
    Das, Dipti Kanta
    Sahu, Susant Kumar
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2014, 4 (03) : 1 - 32
  • [35] Comparative study of the performance of coated and uncoated silicon nitride (Si3N4) ceramics when machining EN-GJL-250 cast iron using the RSM method and 2D and 3D roughness functional parameters
    Laouissi, A.
    Yallese, M. A.
    Belbah, A.
    Khellaf, A.
    Haddad, A.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (05)
  • [36] Comparative study of the performance of coated and uncoated silicon nitride (Si3N4) ceramics when machining EN-GJL-250 cast iron using the RSM method and 2D and 3D roughness functional parameters
    A. Laouissi
    M. A. Yallese
    A. Belbah
    A. Khellaf
    A. Haddad
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41
1234