Effect of Co particle content on microstructure and properties of SnBi/Cu joints

被引：0

作者：

Li Z. ^{[1
]}

Li H. ^{[1
]}

Guo Y. ^{[1
]}

Chen Y. ^{[1
]}

Cheng D. ^{[1
]}

Hu D. ^{[1
]}

Gao J. ^{[1
]}

Li D. ^{[1
]}

机构：

[1] School of Aeronautical Manufacturing Engineering, Nanchang Hangkong University, Nanchang

来源：

Cailiao Gongcheng/Journal of Materials Engineering | 2022年 / 50卷 / 07期

关键词：

Co particle; mechanical property; microstructure; Sn35Bi solder; wettability;

D O I：

10.11868/j.issn.1001-4381.2020.001151

中图分类号：

学科分类号：

摘要：

The microstructure of Sn35Bi-a;CoU: 0%, 0. 3%, 0. 7 %, 1. 0 %, 1. 2 %, 1. 5%, mass fraction) composite solder/Cu joints was observed by scanning electron microscopy (SEM). Combined energy spectrum (EDS) and XRD analysis, the difference of joint structure was studied. The mechanical properties of joints were tested by universal testing machine, and the influence mechanism of Co particle content on the structure and properties of SnBi/Cu joints was studied. The results show that, with the increase of Co particle content, the wettability of Sn35Bi-Co composite solder increases first and then decreases. When Co particle content is 0. 7%, the wettability is the best. When appropriate amount of Co particles is added to the Sn35Bi/Cu joint in the solidification stage, the weld microstructure can be effectively refined, the IMC layer of the interface is more flat, Co atoms in the weld replace Cu atoms in the interface Cu6Sn3 layer, and the (Cu, Co)6Sn3 solid solution can be formed, which can strengthen the IMC layer of the interface. The shear strength of Sn35Bi-Co/Cu joints increases first and then decreases with the increase of Co particle content. When Co particle content is 0. 7%, the maximum value of 54. 09 MPa is obtained. © 2022 Beijing Institute of Aeronautical Materials (BIAM). All rights reserved.

引用

页码：149 / 155

页数：6

共 18 条

[1] LI J D, YANG W C L I Y T, Et al., Influence of Al and Cu on microstructure, electrical conductivity and corrosion resistant property of Sn-20Bi alloy, Journal of Guangxi University (Natural Science Edition), 43, 5, pp. 1967-1975, (2018)
[2] JING Y F, YANG L, GE J G, Et al., Influence of Al2Os particles on microstructure and mechanical properties of Sn58Bi solder, Hot Working Technology, 44, 21, pp. 195-196, (2015)
[3] WANG G Q, YANG L, ZHANG Y C., Microstructure and mechanical properties of Sn58Bi-.rW composite solder, Electronic Components and Materials, 36, 11, pp. 78-82, (2017)
[4] YANG L, ZHOU S, ZHANG Y, Et al., Reinforcement of vanadium on the microstructure and properties of Sn-58Bi lead-free solder joints, Materials Research Express, 6, 6, (2019)
[5] YANG Q, CHENG D H, Et al., The effects of Cu particles on the microstructure of Sn58Bi soldered joints, Journal of Nanchang Hangkong University (Natural Sciences), 30, 2, pp. 74-78, (2016)
[6] GONG L K, LIAO J F, YUAN J H, Et al., Effect of rare earth Y on microstructure and properties of Sn-58Bi solder alloy, Journal of Aeronautical Materials, 38, 4, pp. 101-108, (2018)
[7] ZHU L., Investigation on the microstructure, IMCs morphology and reliability of Sn-58Bi-.rMo solder joints, (2018)
[8] GU H L, CHENG D H, HU D A, Et al., Research of Sn-Bi-Ag solder by particle enhancement, Welding & Joining, 8, pp. 38-41, (2012)
[9] DONG C H, WANG F J, DING H J, Et al., Effect of addition of Co element on properties of Sn-Bi eutectic solder, Hot Working Technology, 44, 1, pp. 190-192, (2015)
[10] LI Z B, HU D A, CHEN Y P, Et al., Effect of Fe particles on the structure and properties of SnBi/Cu joint during aging, Transactions of the China Welding Institution, 41, 8, pp. 22-28, (2020)

← 1 2 →