Study on the constitutive model of Sicp/Al composites

被引：4
|
作者：
Xue X. [1 ]
Xie L. [2 ]
Wang T. [2 ]
机构：
[1] Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, No.5 Zhongguancun South Street, Haidian District, Beijing
[2] School of Mechanical Engineering, Beijing Institute of Technology, No.5 Zhongguancun South Street, Haidian District, Beijing
来源：
Key Engineering Materials | 2016年 / 693卷
关键词：
Constitutive model; Split Hopkinson pressure bar; Volume fraction;
D O I：
10.4028/www.scientific.net/KEM.693.621
中图分类号：
学科分类号：
摘要：
By conducting the quasi-static compression and split Hopkinson pressure bar testing Cthe flow strain-stress curves under strain rate range of 0.0001-1000/s and temperature range of normal-400° of different volume fraction SiC particles reinforced metal matrix composite SiCp/6063Al were obtained. The commonly used Johnson-Cook constitutive model in metal materials was applied in this research. And on the basis of it, the influence of volume fraction to flow stress was utilized to establish the equivalent and homogeneous constitutive model. © 2016 Trans Tech Publications, Switzerland.
引用
收藏
页码：621 / 628
页数：7
相关论文
共 50 条
  • [31] Microstructural analysis of SiCp/Al composites
    Cheng Nanpu
    Zeng Sumin
    Yu Wenbin
    Chen Zhiqian
    Pan Fusheng
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (04) : 602 - 606
  • [32] Study of subgrain Al layer of SiC/Al interface in SiCp/Al-Si composites
    Sui, Xiandong
    Luo, Chengping
    Ouyang, Liuzhang
    Luo, Zhuoxuan
    Cailiao Gongcheng/Journal of Materials Engineering, 2000, (03): : 8 - 10
  • [33] UNIAXIAL AND MULTIAXIAL RATCHETTING OF SiCP/6061Al COMPOSITES: CONSTITUTIVE MODELING AND FINITE ELEMENT SIMULATION
    Guo, S. J.
    Kang, G. Z.
    Zhang, J.
    ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011, 2011, : 746 - 753
  • [34] Model of electroless Ni deposition on SiCp/Al composites and study of the interfacial interaction of coatings with substrate surface
    Li, LB
    An, MZ
    Wu, GH
    APPLIED SURFACE SCIENCE, 2005, 252 (04) : 959 - 965
  • [35] Experimental Study of Machinability in Mill-grinding of SiCp/Al Composites
    Li Jianguang
    Du Jinguang
    Yao Yingxue
    Hao Zhaopeng
    Liu Xiao
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2014, 29 (06): : 1104 - 1110
  • [36] An Experimental Study for Machinability of Al/SiCp Metal Matrix Composites by Laser
    Kasman, S.
    Ozan, S.
    Guleryuz, L. Feray
    Ipek, R.
    ACTA PHYSICA POLONICA A, 2013, 123 (02) : 221 - 223
  • [37] Experimental study of machinability in mill-grinding of SiCp/Al composites
    Jianguang Li
    Jinguang Du
    Yingxue Yao
    Zhaopeng Hao
    Xiao Liu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2014, 29 : 1104 - 1110
  • [38] Study of Surface Defect Detection Techniques in Grinding of SiCp/Al Composites
    Wang, Haotao
    Zhang, Haijun
    Zhou, Ming
    Gu, Chengbo
    Bai, Sutong
    Lin, Hao
    APPLIED SCIENCES-BASEL, 2023, 13 (21):
  • [39] Study on adhesion mechanism of SiCp/Al composites and electroless nickel coating
    Li, LB
    An, MZ
    Wu, GH
    CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2005, 21 (07) : 982 - 986
  • [40] Study on Solidification Process and Residual Stress of SiCp/Al Composites in EDM
    Zhang, Wenchao
    Chang, Hao
    Liu, Yu
    MICROMACHINES, 2022, 13 (06)
12345