A Comparative Study of Fuzzy Techniques to Handle Uncertainty: An Industrial Grinding Process

被引:0
|
作者
Virivinti N. [1 ]
Mitra K. [1 ]
机构
[1] Department of Chemical Engineering, Indian Institute of Technology Hyderabad, Ordnance Factory Estate, Yeddumailaram
来源
Chemical Engineering and Technology | 2016年 / 2016卷
关键词
Chance constrained programming; Fuzzy credibility theory; Industrial grinding process; NSGA-II; Optimization under uncertainty;
D O I
10.1002/CEAT.201500577
中图分类号
学科分类号
摘要
The deterministic optimization models for chemical processes assume perfect information, i.e., the system parameters involved in the models should have fixed values. However, the knowledge about these parameters is often either not easy to obtain or, if available, subjected to uncertainty involved in determining them (e.g. experiments, regression etc.). The optimization results obtained using these deterministic models are, therefore, not robust to uncertainties in the parameters of the system. In this work, fuzzy based approaches, e.g. fuzzy chance constrained programming (FCCP) and fuzzy expected value model (FEVM), have been applied to a multi-objective optimization problem of the industrial grinding process to carry out the uncertainty analysis and the results are compared with respect to the power of risk averseness adopted in the approaches used. These methods assume the uncertain parameters as fuzzy numbers and membership function is used to represent the degree of uncertainty in them. The extent of constraint satisfaction due to the presence of uncertain parameters can be accommodated assuming credibility of constraint satisfaction under FCCP framework whereas the robust set of parameters in the FEVM approach is determined by considering the expectation terms for objectives and constraints. Moreover, the issue of nonlinear relation of uncertain parameters has been handled by adopting simulation based approaches while computing the credibility. The results obtained by FCCP technique show how the presence of uncertainty leads to an operating zone of varied risk appetite of a decision maker by using different uncertain measures such as credibility, possibility and necessity. These approaches are very generic and can be adopted for the study of parametric sensitivity for any process model in a novel manner. © The Authors.
引用
收藏
相关论文
共 50 条
  • [21] Fuzzy logic modeling of electrolytic grinding process
    Rao, KGRK
    Kuppuswamy, G
    PROCEEDINGS OF THE TWELFTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1997, : 299 - 302
  • [22] A fuzzy dynamic uncertainty compensator for industrial robots
    Chen, WW
    Mills, JK
    Chu, JX
    Sun, D
    NEW TECHNOLOGIES FOR COMPUTER CONTROL 2001, 2002, : 223 - 228
  • [23] Comparative Study of Malware Detection Techniques for Industrial Control Systems
    Reid, Deborah
    Harris, Ian
    Petrovski, Andrei
    2021 14TH INTERNATIONAL CONFERENCE ON SECURITY OF INFORMATION AND NETWORKS (SIN 2021), 2021,
  • [24] A Comparative Study to Classify Big Data Using Fuzzy Techniques
    Labib, Soha Safwat
    2016 5TH INTERNATIONAL CONFERENCE ON ELECTRONIC DEVICES, SYSTEMS AND APPLICATIONS (ICEDSA), 2016,
  • [25] Process monitoring in grinding using micromagnetic techniques
    Tönshoff, HK
    Karpuschewski, B
    Regent, C
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1999, 15 (10): : 694 - 698
  • [26] Process Monitoring in Grinding Using Micromagnetic Techniques
    H. K. Tönshoff
    B. Karpuschewski
    C. Regent
    The International Journal of Advanced Manufacturing Technology, 1999, 15 : 694 - 698
  • [27] Model-Based Application of Fuzzy Control to a Class of Industrial Process Operations in Systems With Uncertainty
    Wang, Yang
    Li, Jinna
    Wu, Huiyong
    IEEE ACCESS, 2018, 6 : 23351 - 23360
  • [28] Adaptive Fuzzy Logic Control for Grinding Process Based on Grinding Sound Trend
    Zou, Meiyin
    Yi, Jie
    Yang, Chunhua
    Liao, Qian
    Xiong, Wei
    Wang, Xiaoli
    IFAC PAPERSONLINE, 2022, 55 (21): : 120 - 125
  • [29] DEVELOPMENT OF A METHODICAL APPROACH TO HANDLE UNCERTAINTY DURING THE PROCESS OF PRODUCT MODELLING
    Wuertenberger, J.
    Lotz, J.
    Freund, T.
    Kloberdanz, H.
    DS 84: PROCEEDINGS OF THE DESIGN 2016 14TH INTERNATIONAL DESIGN CONFERENCE, VOLS 1-4, 2016, : 579 - 588
  • [30] Comparative Experimental Study on Cutting Mechanism between Gear Honing and Grinding Process
    Han J.
    Yuan B.
    Wang D.
    Liang H.
    Xia L.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2018, 54 (11): : 205 - 213