Stiffness modeling technique for five-axis milling process system with thin-walled parts

被引：0
|
作者：
Zhao, Tong [1 ]
Bian, Pengxi [1 ]
Wang, Yongfei [2 ]
Zhang, Yibo [2 ]
机构：
[1] Department of Mechanical Engineering, Tsinghua University, Beijing,100084, China
[2] Beijing Power Machinery Research Institute, Beijing,100074, China
来源：
Qinghua Daxue Xuebao/Journal of Tsinghua University | 2024年 / 64卷 / 08期
关键词：
D O I：
10.16511/j.cnki.qhdxxb.2024.27.014
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1435 / 1444
相关论文
共 50 条
  • [21] Multi-objective optimization of milling process for thin-walled parts
    Yang, Jiahao
    Lv, Jingxiang
    Zhang, Yingfeng
    2018 IEEE 15TH INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL (ICNSC), 2018,
  • [22] Research progress on machining deformation of thin-walled parts in milling process
    Yue C.
    Zhang J.
    Liu X.
    Chen Z.
    Liang S.Y.
    Wang L.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2022, 43 (04):
  • [23] Chatter Avoidance by Spindle Speed and Orientation Planning in Five-Axis Ball-End Milling of Thin-Walled Blades
    Karimi, Behnam
    Altintas, Yusuf
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2024, 146 (02):
  • [24] Position-oriented process monitoring in milling of thin-walled parts
    Liu, Dongsheng
    Luo, Ming
    Pelayo, Urbikain
    Trejo, Daniel Olvera
    Zhang, Dinghua
    JOURNAL OF MANUFACTURING SYSTEMS, 2021, 60 : 360 - 372
  • [25] Tool posture dependent chatter suppression in five-axis milling of thin-walled workpiece with ball-end cutter
    Ma, Junjin
    Zhang, Dinghua
    Liu, Yilong
    Wu, Baohai
    Luo, Ming
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (1-4): : 287 - 299
  • [26] Tool posture dependent chatter suppression in five-axis milling of thin-walled workpiece with ball-end cutter
    Junjin Ma
    Dinghua Zhang
    Yilong Liu
    Baohai Wu
    Ming Luo
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 287 - 299
  • [27] Modeling of milling force in multi-axis machining process for thin-walled sculptured surface
    Zhou, Tianxiang
    Yue, Caixu
    Liu, Xianli
    Sun, Shaocong
    Wei, Shiliang
    Zhang, Anshan
    THIN-WALLED STRUCTURES, 2025, 208
  • [28] An approach for improving the machining efficiency and quality of aerospace curved thin-walled parts during five-axis NC machining
    Jiang, Xiaohui
    Lu, Weiwei
    Zhang, Zhenya
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (5-8): : 2477 - 2488
  • [29] An approach for improving the machining efficiency and quality of aerospace curved thin-walled parts during five-axis NC machining
    Xiaohui Jiang
    Weiwei Lu
    Zhenya Zhang
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 2477 - 2488
  • [30] An approach for improving the machining efficiency and quality of aerospace curved thin-walled parts during five-axis NC machining
    Jiang, Xiaohui (jiangxh@usst.edu.cn), 1600, Springer London (97): : 5 - 8
12345