Analysis and optimization of a camber morphing wing model

被引:0
|
作者
Li B. [1 ,2 ]
Li G. [1 ,2 ]
机构
[1] State Key Laboratory of Robotics and System (HIT), Harbin
[2] Shenzhen Graduate School, Harbin Institute of Technology Shenzhen Graduate School, Xili University Town, ShenZhen
来源
Li, Bing (libing.sgs@hit.edu.cn) | 1600年 / SAGE Publications Inc., United States卷 / 13期
关键词
aerodynamic analysis; Camber morphing wing model design; improved AFS optimization algorithm; kinematic simulation; mathematical model;
D O I
10.1177/1729881416664846
中图分类号
学科分类号
摘要
This article proposes a camber morphing wing model that can continuously change its camber. A mathematical model is proposed and a kinematic simulation is performed to verify the wing's ability to change camber. An aerodynamic model is used to test its aerodynamic characteristics. Some important aerodynamic analyses are performed. A comparative analysis is conducted to explore the relationships between aerodynamic parameters, the rotation angle of the trailing edge, and the angle of attack. An improved artificial fish swarm optimization algorithm is proposed, referred to as the weighted adaptive artificial fish-swarm with embedded Hooke-Jeeves search method. Some comparison tests are used to test the performance of the improved optimization algorithm. Finally, the proposed optimization algorithm is used to optimize the proposed camber morphing wing model. © SAGE Publications Ltd, unless otherwise noted. Manuscript content on this site is licensed under Creative Commons Licenses.
引用
收藏
页码:1 / 17
页数:16
相关论文
共 50 条
  • [31] Development of variable camber wing with morphing leading and trailing sections using corrugated structures
    Takahashi, Hiroki
    Yokozeki, Tomohiro
    Hirano, Yoshiyasu
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2016, 27 (20) : 2827 - 2836
  • [32] Design, Manufacture and Test of a Camber Morphing wing Using MFC Actuated Smart Rib
    Kimaru, Jesee
    Bouferrouk, Abdessalem
    2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 791 - 796
  • [33] Wind Tunnel Tests of 3D-Printed Variable Camber Morphing Wing
    Jia, Sijia
    Zhang, Zhenkai
    Zhang, Haibo
    Song, Chen
    Yang, Chao
    AEROSPACE, 2022, 9 (11)
  • [34] Numerical study of wing gust response alleviation based on camber morphing trailing edge
    Wei R.
    Dai Y.
    Yang C.
    Yu S.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2023, 49 (07): : 1864 - 1874
  • [35] An optimization study on load alleviation techniques in gliders using morphing camber
    Vale, Jose
    Afonso, Frederico
    Oliveira, Eder
    Lau, Fernando
    Suleman, Afzal
    STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2017, 56 (02) : 435 - 453
  • [36] Dynamic Model and Analysis of Asymmetric Telescopic Wing for Morphing Aircraft
    Chen Lili
    Guo Zheng
    Wang Wenkai
    2016 THE INTERNATIONAL CONFERENCE ON NANOMATERIAL, SEMICONDUCTOR AND COMPOSITE MATERIALS (ICNSCM 2016), 2016, 65
  • [37] An optimization study on load alleviation techniques in gliders using morphing camber
    José Vale
    Frederico Afonso
    Éder Oliveira
    Fernando Lau
    Afzal Suleman
    Structural and Multidisciplinary Optimization, 2017, 56 : 435 - 453
  • [38] Trajectory Optimization Design for Morphing Wing Missile
    Ruisheng Sun
    Chao Ming
    Chuanjie Sun
    Journal of Harbin Institute of Technology(New series), 2015, (05) : 25 - 30
  • [39] Morphing wing optimization for steady level flight
    Korpe, Durmus S.
    Ozgen, Serkan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2017, 231 (13) : 2317 - 2330
  • [40] Unleashing the Potential of Morphing Wings: A Novel Cost Effective Morphing Method for UAV Surfaces, Rear Spar Articulated Wing Camber
    Ozbek, Emre
    Ekici, Selcuk
    Karakoc, T. Hikmet
    DRONES, 2023, 7 (06)