Saturated pool boiling from downward facing structured surfaces with grooves

被引：0
|
作者：
Zhong D. [1 ]
Meng J. [1 ]
Li Z. [1 ]
机构：
[1] Institutes of Engineering Thermal Physics, School of Aerospace Engineering, Tsinghua University, Beijing
来源：
Huagong Xuebao/CIESC Journal | 2016年 / 67卷 / 09期
关键词：
Bubble; Critical heat flux; Heat transfer; Orientation; Phase change; Surface;
D O I：
10.11949/j.issn.0438-1157.20160015
中图分类号：
学科分类号：
摘要：
In-vessel retention is a key severe accident management strategy now widely adopted by some nuclear power plants. The saturated pool boiling heat transfer coefficients and critical heat flux (CHF) were measured from downward facing structured surface with grooves in deionized water to enhance the CHF. The orientations were 5°, 30°, 45°, 60° and 90° (vertical). The results showed that the nucleate boiling heat transfer coefficients and the local CHF for structured surface with grooves were consistently higher than those for plain surface. Compared with plain surface, the CHF increase could reach 65%-90% for structured surface. The vapor blanket and wavy vapor layer bubble structures with different CHF trigger mechanisms on the downward facing surface at high heat fluxes were observed on structured surface. The enhancement of the local CHF and the nucleate boiling heat transfer coefficients was mainly due to the significantly increase of heat transfer area and the grooves that effectively improve surface wettability. © All Right Reserved.
引用
收藏
页码：3559 / 3565
页数：6
相关论文
共 20 条
  • [11] Theofanous T.G., Tu J.P., Salmassi T., Et al., Quantification of limits to coolability in ULPU-2000 configuration: CRSS-02.05.3, (2002)
  • [12] Chu T.Y., Bainbridge B.L., Simpson R.B., Et al., Ex-vessel boiling experiments: laboratory- and reactor-scale testing of the flooded cavity concept for in-vessel core retention (I: Observation of quenching of downward-facing surfaces, Nucl. Eng. Des., 169, 1-3, pp. 77-88, (1997)
  • [13] Chu T.Y., Bentz J.H., Slezak S.E., Et al., Ex-vessel boiling experiments: laboratory-and reactor-scale testing of the flooded cavity concept for in-vessel core retention (II): Reactor-scale boiling experiments of the flooded cavity concept for in-vessel core retention, Nucl. Eng. Des., 169, 1-3, pp. 89-99, (1997)
  • [14] Haddad K.H., An experimental and theoretical study of two-phase boundary layer flow on the outside of curved downward-facing surfaces, (1996)
  • [15] Yang J., Dizon M.B., Cheung F.B., Et al., CHF enhancement by vessel coating for external reactor vessel cooling, Nucl. Eng. Des., 236, 10, pp. 1089-1098, (2006)
  • [16] Noh S.W., Suh K.Y., Critical heat flux in various inclined rectangular straight surface channels, Exp. Therm. Fluid Sci., 52, pp. 1-11, (2014)
  • [17] Noh S.W., Suh K.Y., Critical heat flux for APR1400 lower head vessel during a severe accident, Nucl. Eng. Des., 258, pp. 116-129, (2013)
  • [18] Zhong D.W., Meng J.A., Li Z.X., Et al., Critical heat flux for downward-facing saturated pool boiling on pin fin surfaces, Int. J. Heat Mass Trans., 87, pp. 201-211, (2015)
  • [19] Howard A.H., Mudawar I., Orientation effects on pool boiling critical heat flux (CHF) and modeling of CHF for near-vertical surfaces, Int. J. Heat Mass Trans., 42, 9, pp. 1665-1688, (1999)
  • [20] Kim Y.H., Kim S.J., Kim J.J., Et al., Visualization of boiling phenomena in inclined rectangular gap, Int. J. Mul. Flow, 31, 5, pp. 618-642, (2005)
12