Investigation on flow pattern of sidewall compression scramjet inlet with single central strut

被引：0

作者：

Gong, Peng ^{[1
]}

Yue, Lian-Jie ^{[1
]}

Xiao, Ya-Bin ^{[1
]}

Wang, Shi-Fen ^{[1
]}

Zhang, Xin-Yu ^{[1
]}

机构：

[1] Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Acad. of Sci., Beijing 100080, China

来源：

Shiyan Liuti Lixue/Journal of Experiments in Fluid Mechanics | 2008年 / 22卷 / 01期

关键词：

Boundary layers - Compressive strength - Computer simulation - Flow interactions - Flow visualization - Hypersonic flow - Jet engines - Pressure - Struts - Wall flow;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Flow feature in a sidewall compression scramjet inlet with central strut was investigated using surface oil flow visualization, pressure measurements and numerical simulation. Two types of sidewall scramjet inlets were studied with a back swept strut and a forward swept strut respectively. Appropriate strut location can avoid the interaction of shocks induced by side wall and strut, and generate smaller boundary layer separation, which is favorable for improving the inlet performance. The inlet with forward strut is good for increasing capture ratio, but increases the total pressure loss for larger boundary layer separation.

引用

页码：31 / 35

共 43 条

[31] Numerical investigation on influences of inlet flow pattern on RP-3 thermal oxidation deposition
Han, Zhixiong
Zhou, Weixing
Zan, Hao
Jia, Zhenjian
Martynenko, Sergey
Yanovskiy, Leonid
FUEL, 2021, 303
[32] Numerical investigation on effect of inlet nozzle size on efficiency and flow pattern in squirrel cage fans
Gholamian, Mojtaba
Rao, Gurram K. Mohan
Bhramara, Panitapu
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2013, 227 (08) : 896 - 907
[33] Experimental Investigation of Flow Boiling Instability in a Single Horizontal Microtube With and Without Inlet Restriction
Fan, YanFeng
Hassan, Ibrahim
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2012, 134 (08):
[34] INVESTIGATION OF THE FLOW PATTERN OF THE TOROIDAL MOVEMENT IN THE COMBUSTION CHAMBER OF A COMPRESSION IGNITION ENGINE.
Shi, Shaoxi
Gong, Yunyi
Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 1986, 4 (01): : 1 - 12
[35] Simulation of gas flow pattern and separation efficiency in cyclone with conventional single and spiral double inlet configuration
Zhao, B.
Su, Y.
Zhang, J.
CHEMICAL ENGINEERING RESEARCH & DESIGN, 2006, 84 (A12): : 1158 - 1165
[36] INVESTIGATION OF THE INLET FILTER INFLUENCE ON UNSTEADY FLOW PHENOMENA IN A SINGLE-STAGE CENTRIFUGAL BLOWER
Kabalyk, K.
Kryllowicz, W.
Liskiewicz, G.
Horodko, L.
11TH EUROPEAN CONFERENCE ON TURBOMACHINERY: FLUID DYNAMICS AND THERMODYNAMICS, 2015,
[37] Numerical investigation on the performance and flow pattern of two novel innovative designs of four-inlet cyclone separator
Le, Dang Khoi
Yoon, Joon Yong
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2020, 150
[38] Experimental investigation of the effect of inlet baffle position on the flow pattern, oil concentration, and efficiency of rectangular separator tank
Hussein, Haitham A.
Abdullah, Rozi
Ibrahim, Mohammed A.
Said, Md Azlin Md
DESALINATION AND WATER TREATMENT, 2016, 57 (01) : 24333 - 24340
[39] Experimental investigation of flow-boiling characteristics in a single micro-channel with inlet cavitation structure
Yuan, Junfei
Zeng, Miao
Guo, Chaohong
Cao, Hongzhang
Tang, Dawei
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART N-JOURNAL OF NANOMATERIALS NANOENGINEERING AND NANOSYSTEMS, 2016, 230 (02) : 71 - 75
[40] EXPERIMENTAL INVESTIGATION OF FLOW BEHAVIOR IN A BEND AND SAND EROSION PATTERN UNDER SINGLE-PHASE AND MULTIPHASE FLOW CONDITIONS
Zahedi, Peyman
Asgharpour, Alireza
Khanouki, Hadi Arabnejad
McLaury, Brenton S.
Shirazi, Siamack A.
PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2018, VOL 3, 2018,

← 1 2 3 4 5 →