Composition and thickness optimization of anti-CMAS layer on air plasma sprayed thermal barrier coatings

被引:0
|
作者
Lou, Si-Yu [1 ]
Shan, Xiao [1 ]
Zhao, Xiao-Feng [1 ]
机构
[1] School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai,200240, China
来源
Surface Technology | 2018年 / 47卷 / 02期
关键词
Alumina - Aluminum oxide - Ceramic coatings - Ceramic materials - Corrosion prevention - Corrosion resistant coatings - Deposits - High temperature corrosion - Plasma jets - Plasma spraying - Scanning electron microscopy - Spectrometers - Sprayed coatings - Thermal conductivity - Thermal expansion - Yttria stabilized zirconia - Yttrium oxide;
D O I
10.16490/j.cnki.issn.1001-3660.2018.02.033
中图分类号
学科分类号
摘要
The work aims to investigate composition and thickness of impedance layers on thermal barrier coatings (TBCs), so that the layers can effective impede corrosion of CMAS deposit and also easily adhere to thermal barrier coatings. Protection effects of uniformly blended different content of nano-sized Al2O3 and 8YSZ on CMAS deposit were studied with porous pressureless sintered ceramic pellets at high temperature. Microstructure, corrosion depth and reaction product of the CMAS corrosion layers was analyzed and studied with scanning electron microscope, energy dispersive spectrometer and X-ray diffractometer, respectively. Then thermal barrier coatings with 8YSZ/Al2O3 ceramic layers were prepared by performing air plasma spraying (APS) based on optimal composition. Corrosion depth of CMAS was analyzed and measured, and thickness of CMAS impedance layers was proposed. Addition of Al2O3 can effectively prevent CMAS from infiltrating. Moreover, the higher the Al2O3 content was, the better the protection effects were. However, there was a nonlinear correlation between CMAS infiltration depth and Al2O3 addition. Concerning thermal properties and mechanical properties of the TBC ceramic layers, optimal composition of TBC composite ceramic layers was determined to be 70wt%8YSZ+30wt%Al2O3. Based upon the experimental results, bilayer TBC ceramic layer structure consisting of YSZ/Al2O3 composite ceramic layers (50 μm) and YSZ ceramic layers was proposed. According to overall calculations, thermal expansion coefficient of the YSZ/Al2O3 composite ceramic layers was 9.93×10-6 °C-1, and thermal conductivity of the bilayer TBC ceramic layers was 2.4 W/(m·K). Finally, the mechanism of CMAS corrosion being mitigated by Al2O3 was quantitatively analyzed. The optimal composition of YSZ/Al2O3 composite ceramic layers is 70wt%8YSZ+30wt%Al2O3, and thickness is 50 μm, which can effectively prevent CMAS corrosion at high temperature. © 2018 Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码:208 / 217
相关论文
共 50 条
  • [21] Stiffness of Plasma Sprayed Thermal Barrier Coatings
    Paul, Shiladitya
    COATINGS, 2017, 7 (05):
  • [22] Deposition of the plasma sprayed thermal barrier coatings
    Ilyschenko, A
    Okovity, V
    Sobolevskij, S
    Dubelir, T
    PUBLICATIONS OF THE ASTRONOMICAL OBSERVATORY OF BELGRADE, NO 53: PROCEEDINGS OF THE FIRST BELARUSSIAN-YUGOSLAVIAN SYMPOSIUM ON PHYSICS AND DIAGNOSTICS OF LABORATORY & ASTROPHYSICAL PLASMA, 1996, : 121 - 121
  • [23] Effects of temperature on oxidation behaviour of air plasma sprayed thermal barrier coatings
    Che, C.
    Wu, G. Q.
    Xu, H. M.
    Qi, H. Y.
    Huang, Z.
    Yang, X. G.
    MATERIALS AT HIGH TEMPERATURES, 2009, 26 (04) : 365 - 368
  • [24] Experimental study on radiative properties of air plasma sprayed thermal barrier coatings
    Yang, G.
    Zhao, C. Y.
    Wang, B. X.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 66 : 695 - 698
  • [25] Progress update on extending the durability of air plasma sprayed thermal barrier coatings
    Luo, Lirong
    Chen, Ying
    Zhou, Ming
    Shan, Xiao
    Lu, Jie
    Zhao, Xiaofeng
    CERAMICS INTERNATIONAL, 2022, 48 (13) : 18021 - 18034
  • [26] MICROSTRUCTURE, COMPOSITION AND PROPERTY RELATIONSHIPS OF PLASMA-SPRAYED THERMAL BARRIER COATINGS
    TAYLOR, R
    BRANDON, JR
    MORRELL, P
    SURFACE & COATINGS TECHNOLOGY, 1992, 50 (02): : 141 - 149
  • [27] Pore filling behavior of air plasma spray thermal barrier coatings under CMAS attack
    Shan, Xiao
    Chen, Wenfu
    Yang, Lixia
    Guo, Fangwei
    Zhao, Xiaofeng
    Xiao, Ping
    CORROSION SCIENCE, 2020, 167
  • [28] Plasma sprayed nanostructured GdPO4 thermal barrier coatings: Preparation microstructure and CMAS corrosion resistance
    Guo, Lei
    Li, Mingzhu
    Cheng, Yuxian
    Zhang, Chenglong
    He, Sixian
    Zhang, Yuchen
    Ye, Fuxing
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2017, 100 (09) : 4209 - 4218
  • [29] Variation of thermo-mechanical properties of air-plasma sprayed thermal barrier coatings by calcium-magnesium-aluminosilicate (CMAS) infiltration
    Yamagishi S.
    Zairyo/Journal of the Society of Materials Science, Japan, 2021, 70 (02) : 81 - 85
  • [30] Thermal conductivity prediction in air plasma sprayed thermal barrier coatings containing multifarious defects
    Zhao, Xiaohui
    Zhao, Meng
    Ren, Xiaorui
    Zheng, Yixin
    Xing, Yan
    Yang, Jun
    Wang, Min
    Wan, Chunlei
    Pan, Wei
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2021, 104 (09) : 4788 - 4802