Composition and thickness optimization of anti-CMAS layer on air plasma sprayed thermal barrier coatings

被引:0
|
作者
Lou, Si-Yu [1 ]
Shan, Xiao [1 ]
Zhao, Xiao-Feng [1 ]
机构
[1] School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai,200240, China
来源
Surface Technology | 2018年 / 47卷 / 02期
关键词
Alumina - Aluminum oxide - Ceramic coatings - Ceramic materials - Corrosion prevention - Corrosion resistant coatings - Deposits - High temperature corrosion - Plasma jets - Plasma spraying - Scanning electron microscopy - Spectrometers - Sprayed coatings - Thermal conductivity - Thermal expansion - Yttria stabilized zirconia - Yttrium oxide;
D O I
10.16490/j.cnki.issn.1001-3660.2018.02.033
中图分类号
学科分类号
摘要
The work aims to investigate composition and thickness of impedance layers on thermal barrier coatings (TBCs), so that the layers can effective impede corrosion of CMAS deposit and also easily adhere to thermal barrier coatings. Protection effects of uniformly blended different content of nano-sized Al2O3 and 8YSZ on CMAS deposit were studied with porous pressureless sintered ceramic pellets at high temperature. Microstructure, corrosion depth and reaction product of the CMAS corrosion layers was analyzed and studied with scanning electron microscope, energy dispersive spectrometer and X-ray diffractometer, respectively. Then thermal barrier coatings with 8YSZ/Al2O3 ceramic layers were prepared by performing air plasma spraying (APS) based on optimal composition. Corrosion depth of CMAS was analyzed and measured, and thickness of CMAS impedance layers was proposed. Addition of Al2O3 can effectively prevent CMAS from infiltrating. Moreover, the higher the Al2O3 content was, the better the protection effects were. However, there was a nonlinear correlation between CMAS infiltration depth and Al2O3 addition. Concerning thermal properties and mechanical properties of the TBC ceramic layers, optimal composition of TBC composite ceramic layers was determined to be 70wt%8YSZ+30wt%Al2O3. Based upon the experimental results, bilayer TBC ceramic layer structure consisting of YSZ/Al2O3 composite ceramic layers (50 μm) and YSZ ceramic layers was proposed. According to overall calculations, thermal expansion coefficient of the YSZ/Al2O3 composite ceramic layers was 9.93×10-6 °C-1, and thermal conductivity of the bilayer TBC ceramic layers was 2.4 W/(m·K). Finally, the mechanism of CMAS corrosion being mitigated by Al2O3 was quantitatively analyzed. The optimal composition of YSZ/Al2O3 composite ceramic layers is 70wt%8YSZ+30wt%Al2O3, and thickness is 50 μm, which can effectively prevent CMAS corrosion at high temperature. © 2018 Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码:208 / 217
相关论文
共 50 条
  • [1] CMAS attack behavior of air plasma sprayed thermal barrier coatings with big pores
    Shan X.
    Wu D.
    Cai H.
    Luo L.
    Yang L.
    Jia L.
    Guo F.
    Zhao X.
    Journal of the European Ceramic Society, 2022, 42 (13) : 6159 - 6169
  • [2] Effects of thickness on thermal and mechanical properties of air-plasma sprayed thermal barrier coatings
    Lee, Sang-Yeop
    Kwon, Jae-Young
    Kang, Tae-Woong
    Jung, Yeon-Gil
    Paik, Ungyu
    ECO-MATERIALS PROCESSING AND DESIGN XI, 2010, 658 : 372 - +
  • [3] Thermal shock resistance of air plasma sprayed thermal barrier coatings
    Fleck, N. A.
    Cocks, A. C. F.
    Lampenscherf, S.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (11) : 2687 - 2694
  • [4] Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection
    Tao Liu
    Shu-Wei Yao
    Li-Shuang Wang
    Guan-Jun Yang
    Cheng-Xin Li
    Chang-Jiu Li
    Journal of Thermal Spray Technology, 2016, 25 : 213 - 221
  • [5] Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection
    Liu, Tao
    Yao, Shu-Wei
    Wang, Li-Shuang
    Yang, Guan-Jun
    Li, Cheng-Xin
    Li, Chang-Jiu
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (1-2) : 213 - 221
  • [6] Modification of oxide layer in plasma-sprayed thermal barrier coatings
    Chen, WR
    Wu, X
    Dudzinski, D
    Patnaik, PC
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21): : 5863 - 5868
  • [7] Air plasma sprayed thermal barrier coatings on titanium alloy substrates
    Zhou, Hong
    Li, Fei
    Wang, Bo He Jun
    Sun, Bao-De
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (16-17): : 7360 - 7367
  • [8] Effect of residual stresses on air plasma sprayed thermal barrier coatings
    Khan, AN
    Lu, J
    Liao, H
    SURFACE & COATINGS TECHNOLOGY, 2003, 168 (2-3): : 291 - 299
  • [9] OPTIMIZING OF THE REFLECTIVITY OF AIR PLASMA SPRAYED CERAMIC THERMAL BARRIER COATINGS
    Stuke, A.
    Carius, R.
    Marques, J-L
    Mauer, G.
    Schulte, M.
    Sebold, D.
    Vassen, R.
    Stoever, D.
    ADVANCED CERAMIC COATINGS AND INTERFACES II, 2008, 28 (03): : 99 - 113
  • [10] Thermal cyclic behavior of air plasma sprayed thermal barrier coatings sprayed on stainless steel substrates
    Khan, A. Nusair
    Lu, J.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (08): : 4653 - 4658