The use of HDH titanium alloy powder for additive manufacturing application

被引：0
|
作者：
Kanou O. [1 ]
Fukada N. [1 ]
Takenaka S. [2 ]
机构：
[1] Toho Titanium Co., Ltd., 3-3-5, Chigasaki, Chigasaki
[2] Toho Technical Service Co., Ltd., 3-3-5, Chigasaki, Chigasaki
来源：
Kanou, Osamu (okano@toho-titanium.co.jp) | 1600年 / Journal of the Japan Society of Powder and Powder Metallurgy, 15 Morimoto-cho Shimogamo, Sakyo-Ku Kyoto, Japan卷 / 64期
关键词：
Additive manufacturing; Fluidity; Hdh powder; Spherical powder; Titanium alloy;
D O I：
10.2497/jjspm.64.295
中图分类号：
学科分类号：
摘要：
Spherical powder with excellent fluidity is generally considered to be a suitable raw material powder for additive manufacturing (AM), as opposed to irregularly shaped powder produced by pulverization. The authors have investigated the possibility of obtaining a mixed powder comprising irregularly shaped Ti-6Al-4V alloy powder and spherical Ti-6Al-4V alloy powder. The powders were produced by the hydride-dehydride process and the plasma atomization process, respectively. The fluidity of the mixed powder was confirmed to be an acceptable level for AM and the chemical composition and tensile properties of the AM product using the mixed powder were same as those of the AM product using 100% spherical powder.
引用
收藏
页码：295 / 299
页数：4
相关论文
共 50 条
  • [41] Progress in additive manufacturing, additive repair and fatigue evaluation of aviation titanium alloy blades
    Wang, Lingfeng
    Li, Yinghong
    Zhou, Liucheng
    Lou, Yanshan
    Liu, Shijie
    Zheng, Dayong
    Yi, Min
    MATERIALS RESEARCH LETTERS, 2023, 11 (12): : 973 - 1012
  • [42] Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing
    Liang, Zhi
    Zhirnov, Ivan
    Zhang, Fan
    Jones, Kevontrez K.
    Deisenroth, David
    Williams, Maureen
    Kattner, Ursula
    Moon, Kil-won
    Liu, Wing-Kam
    Lane, Brandon
    Campbell, Carelyn
    MATERIALIA, 2020, 14 (14):
  • [43] Synthesis of NiTi alloy powders for powder-based additive manufacturing
    Kim, Artem
    Makhmutov, Tagir
    Razumov, Nikolay
    Silin, Aleksey
    Popovich, Anatoliy
    Zhu, Jia-Ning
    Popovich, Vera
    MATERIALS TODAY-PROCEEDINGS, 2020, 30 : 679 - 682
  • [44] Alloy 718: Laser Powder Bed Additive Manufacturing for Turbine Applications
    Kelkar, R.
    Andreaco, A.
    Ott, E.
    Groh, J.
    PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS, 2018, : 53 - 68
  • [45] Additive manufacturing of a new titanium alloy with tunable microstructure and isotropic properties
    Chang, Jiaqiang
    Ma, Yingjie
    Huang, Sensen
    Qi, Min
    Zhai, Zirong
    Wu, Yingna
    Yang, Rui
    Zhang, Zhenbo
    ADDITIVE MANUFACTURING, 2024, 95
  • [46] Particle-based simulation of powder application in additive manufacturing
    Parteli, Eric J. R.
    Poeschel, Thorsten
    POWDER TECHNOLOGY, 2016, 288 : 96 - 102
  • [47] Sustainable Recovery of Titanium Alloy: From Waste to Feedstock for Additive Manufacturing
    Tebaldo, Vincenzo
    di Confiengo, Giovanna Gautier
    Duraccio, Donatella
    Faga, Maria Giulia
    SUSTAINABILITY, 2024, 16 (01)
  • [48] High strength heat-treatable β-titanium alloy for additive manufacturing
    Bermingham, M. J.
    Kent, D.
    Pace, B.
    Cairney, J. M.
    Dargusch, M. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
  • [49] Synthesis of titanium orthorhombic alloy using binder jetting additive manufacturing
    Polozov, Igor
    Sufiiarov, Vadim
    Shamshurin, Alexey
    MATERIALS LETTERS, 2019, 243 : 88 - 91
  • [50] In situ design of advanced titanium alloy with concentration modulations by additive manufacturing
    Zhang, Tianlong
    Huang, Zhenghua
    Yang, Tao
    Kong, Haojie
    Luan, Junhua
    Wang, Anding
    Wang, Dong
    Kuo, Way
    Wang, Yunzhi
    Liu, Chain-Tsuan
    SCIENCE, 2021, 374 (6566) : 478 - +
12345