The heat treatment impact on material properties of 34CrNiMo6 steel

被引：0
|
作者：
Janeková M. [1 ]
Koštialiková D. [1 ]
Dubec A. [1 ]
Burget M. [1 ]
Pešlová F. [1 ]
机构：
[1] Faculty of Industrial Technology in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, Púchov, Púchov
来源：
Manufacturing Technology | 2018年 / 18卷 / 06期
关键词：
Fracture; Heat treatment; Melt; Microstructure; Steel;
D O I：
10.21062/ujep/200.2018/a/1213-2489/mt/18/6/912
中图分类号：
学科分类号：
摘要：
An article deals with the assessment of the heat treatment of the material for a particular machine component. This material is 34CrNiMo6, made of two melts. This steel belongs to a group of materials with special properties for working at higher temperatures and for the production of demanding components, turbine wheels, cardan shafts, toothed wheels. The material was evaluated for microstructure quality before and after heat treatment. Based on metallographic microstructures, it is possible to review the heat treatment mode, which subsequently affects the mechanical properties of the components. For a particular design element, better cast material was recommended based on a comprehensive evaluation. © 2018. Published by Manufacturing Technology.
引用
收藏
页码：912 / 916
页数：4
相关论文
共 50 条
  • [21] Fatigue and fretting fatigue of ion-nitrided 34CrNiMo6 steel
    Costa, JD
    Ferreira, JM
    Ramalho, AL
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2001, 35 (01) : 69 - 79
  • [22] FATIGUE LIFE IMPROVEMENT OF METAL SHEETS MADE OF 34CrNiMo6 STEEL
    Dzugan, Jan
    Novy, Zbysek
    Donatova, Martina
    Dlouhy, Jaromir
    Konopik, Pavel
    METAL 2011: 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2011, : 529 - 535
  • [23] Non-metallic inclusions and fatigue strength of steel 34CrNiMo6
    Goryany, Vyacheslav
    Myronova, Olga
    Schubrikoff, Erich
    Buch, Johannes
    Stein, Frank
    MATERIALS TESTING, 2018, 60 (10) : 1004 - 1012
  • [24] FATIGUE-LIFE ENHANCEMENT OF SHEETS MADE OF 34CrNiMo6 STEEL
    Dzugan, Jan
    Novy, Zbysek
    Maresova, Martina
    MATERIALI IN TEHNOLOGIJE, 2014, 48 (06): : 959 - 963
  • [25] CAVITATION EROSION BEHAVIOR OF LASER NITRIDED 34CrNiMo6 ALLOYED STEEL
    Ghera, Cristian
    Mitelea, Ion
    Bordeasu, Ilare
    Craciunescu, Corneliu
    METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 706 - 711
  • [26] Monotonic and Cyclic Behavior of DIN 34CrNiMo6 Tempered Alloy Steel
    Branco, Ricardo
    Costa, Jose D. M.
    Antunes, Fernando V.
    Perdigao, Sandra
    METALS, 2016, 6 (05)
  • [27] 34CrNiMo6材料低温韧性研究
    张波
    范华
    张邦强
    东方电气评论, 2013, 27 (01) : 38 - 43
  • [28] Experimental Research on Dry Cutting 34CrNiMo6
    Yang, H.
    Wang, X. B.
    Xie, L. J.
    Pei, J. J.
    Wang, T.
    HIGH SPEED MACHINING, 2011, 188 : 319 - 324
  • [29] Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel
    Branco, R.
    Costa, J. D.
    Antunes, F. V.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2012, 58 (01) : 28 - 34
  • [30] Influence of mean shear stress on the torsional fatigue behaviour of 34CrNiMo6 steel
    Pallares-Santasmartas, Luis
    Albizuri, Joseba
    Aviles, Alexander
    Saintier, Nicolas
    Merzeau, Jonathan
    INTERNATIONAL JOURNAL OF FATIGUE, 2018, 113 : 54 - 68
12345