Recrystallization kinetics and microstructure evolution during annealing of cold rolled 430 stainless steel

被引:0
|
作者
Zhang, Xiong [1 ]
Wen, Zhi [2 ]
Dou, Rui-Feng [2 ]
Zhang, Rui-Jie [3 ]
Li, Zhi-Qiang [1 ]
机构
[1] School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
[2] Beijing Key Laboratory for Energy Saving and Emission Reduction of Metallurgical Industry, Beijing 100083, China
[3] School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
关键词
Stainless steel - Activation energy - Kinetics - Cold rolling - Annealing - Metal cladding - Steel sheet;
D O I
暂无
中图分类号
学科分类号
摘要
Evolution of recrystallization microstructure and hardness of cold rolled 430 stainless steel during isothermal annealing in the range of 650°C to 875°C were studied, and the recrystallization kinetics model was established. The results show that annealing temperature has significant effect on the recrystallization incubation time and the time for complete recrystallization, the recrystallization is completed at 825°C for 5 min and at 850°C for 34 s, however, full recrystallization is not observed, in the experimental time range for the temperature lower than 800°C. Finally, the recrystallization kinetics of this material is established by JMAK type model, the values of the Avrami exponent is in the range of 0.5 to 1.0, and its activation energy is 309.12 kJ/mol.
引用
收藏
页码:212 / 216
相关论文
共 50 条
  • [21] Texture evolution of ferritic (AISI 430) stainless steel strips during cold rolling, annealing and drawing
    Ferreira Filho, A.
    Herrera, C.
    de Lima, N. B.
    Plaut, R. L.
    Padilha, A. F.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4926 - +
  • [22] Microstructural Evolution and Recrystallization Kinetics of a Cold-Rolled, Ferrite-Martensite Structure During Intercritical Annealing
    Etesami, S. A.
    Enayati, M. H.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (07): : 3271 - 3276
  • [23] Microstructural Evolution and Recrystallization Kinetics of a Cold-Rolled, Ferrite-Martensite Structure During Intercritical Annealing
    S. A. Etesami
    M. H. Enayati
    Metallurgical and Materials Transactions A, 2016, 47 : 3271 - 3276
  • [24] Recrystallization-transformation combined reactions during annealing of a cold rolled ferritic-austenitic duplex stainless steel
    Reick, W
    Pohl, M
    Padilha, AF
    ISIJ INTERNATIONAL, 1998, 38 (06) : 567 - 571
  • [25] Phase transformation and recrystallization of cold-rolled AISI 304L austenitic stainless steel during annealing
    Wang, Peng
    Siddiqui, Muhammad Farrukh
    Poletti, Maria Cecilia
    Enzinger, Norbert
    MATERIALS & DESIGN, 2025, 252
  • [26] Tailoring the microstructure and mechanical properties of superaustenitic stainless steel by cold rolling and recrystallization annealing
    Sohrabi, Mohammad Javad
    Mirzadeh, Hamed
    Roostaei, Milad
    Renk, Oliver
    Geranmayeh, Abdol Reza
    Mahmudi, Reza
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2023, 23 (04)
  • [27] Microstructure and texture evolution in cold-rolled W during annealing
    Liu, Wenbin
    Zhang, Wen
    Li, Jianfeng
    Xu, Hailong
    Liu, Hui
    Xia, Mingxing
    Li, Yanchao
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 123
  • [28] Microstructure and texture evolution of cold-rolled deep-drawing steel sheet during annealing
    Zhou, Le-yu
    Wu, Lei
    Liu, Ya-zheng
    Cheng, Xiao-jie
    Sun, Jin-hong
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (06) : 541 - 548
  • [29] Crystallographic texture evolution of ferritic stainless steel strips (AISI 430) during cold rolling, annealing and drawing
    Ferreira Filho, Antenor
    Herrera, Clara
    de Lima, Nelson Batista
    Plaut, Ronald Lesley
    Padilha, Angelo Fernando
    REM-REVISTA ESCOLA DE MINAS, 2008, 61 (02) : 151 - 158
  • [30] Microstructure and texture evolution of cold-rolled deep-drawing steel sheet during annealing
    Le-yu Zhou
    Lei Wu
    Ya-zheng Liu
    Xiao-jie Cheng
    Jin-hong Sun
    International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 541 - 548