Simulation of metal ceramic single layer coatings for solar energy applications

被引：12

作者：

Singh M M. ^{[1
]}

Kumar M. ^{[1
]}

Sivaiah P. ^{[2
]}

G. V. ^{[3
]}

Kumar A. ^{[4
]}

Kumar D. ^{[5
]}

Pandey S. ^{[6
]}

Singh A.K. ^{[6
]}

Deifalla A.F. ^{[7
]}

Hasnain S.M.M. ^{[8
]}

机构：

[1] Department of Mechanical Engineering, RV Institute of Technology and Management, Chaithanya Layout, 8th Phase, J. P. Nagar, Bengaluru

[2] Department of Mechanical Engineering, Madanapalle Institute of Technology & Science, Madanapalle

[3] Department of Mechanical Engineering, Dayananda Sagar College of Engineering, Bangalore

[4] Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore

[5] Department of Mechanical Engineering, National Institute of Technology, Durgapur

[6] Department of Production and Industrial Engineering, Birla Institute of Technology, Mesra, Ranchi

[7] Department of Structural Engineering and Construction Management, Future University, New Cairo City

[8] Faculty of Engineering and Applied Science, Usha Martin University, Ranchi

来源：

Materials Science for Energy Technologies | 2024年 / 7卷

关键词：

Coatings; Metal ceramic; Simulation; Single layer; Solar energy applications;

D O I：

10.1016/j.mset.2023.06.003

中图分类号：

学科分类号：

摘要：

The coating materials, thickness and number of layers directly influence the reflectance and absorptance properties of the thin films. However, while selecting the materials for single and coatings, the substrate's refractive index; bond layer, functional layer and protective layer have to be carefully chosen to obtain the desired reflectance and absorptance values. Hence, modelling and simulating the thin film coatings is essential before conducting the experiments to get meaningful results. The simulation results of single coatings have been discussed. Generally, glass is one of the widely used substrate materials for solar reflectors, aluminum is the optimal functional material, with a reflection of 93 % of light. Nickel would be a preferable functional layer with a reflection of 64 % and absorptance of 36 %, Si3N4 being the acceptable bond layers and protective layers with a reflection of 68 % some solar thermal receiver tube applications however research effort is being made to find alternate lightweight materials for this application. Polycarbonate has been chosen as an alternate material for the substrate because it is light in weight with a reflection of 93 %, which is durable and not fragile. © 2023

引用

页码：85 / 90

页数：5

共 50 条

[41] Metal-organic framework materials for solar energy applications
Lin, Wenbin
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2015, 249
[42] LiDonit®-A Potential Secondary Raw Material for Ceramic Applications in Concentrated Solar Energy
Alkan, Goezde
Mechnich, Peter
Pernpeintner, Johannes
MINERALS, 2024, 14 (08)
[43] Functional multi-layer nitride coatings for high temperature solar selective applications
Valleti, Krishna
Krishna, D. Murali
Joshi, S. V.
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2014, 121 : 14 - 21
[44] Conductivity of Metal (Al, Cu)-Dielectric Composites and Modeling of the Single-and Multi-layer Composite Coatings for Microwave Applications
Borisova, A.
Bondar, B.
Machulyansky, A.
Rodionov, M.
Yakimenko, Y.
Bovtun, V.
Kempa, M.
2014 IEEE 34TH INTERNATIONAL CONFERENCE ON ELECTRONICS AND NANOTECHNOLOGY (ELNANO), 2014, : 164 - 167
[45] A Selective Review of Ceramic, Glass and Glass-Ceramic Protective Coatings: General Properties and Specific Characteristics for Solar Cell Applications
Fraser, Rebekah
Girtan, Mihaela
MATERIALS, 2023, 16 (11)
[46] Resistant transition-metal-nitrides based coatings for solar energy conversion
Wang, Xiaobo
Li, Kewei
Cheng, Xudong
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (07) : 4076 - 4085
[47] Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system
Klapkiv, MD
MATERIALS SCIENCE, 1999, 35 (02) : 279 - 283
[48] Metal-ceramic and ceramic-ceramic interfaces and their applications
Feuersanger, AE
HIGH TEMPERATURE MATERIALS CHEMISTRY, PTS I AND II, PROCEEDINGS, 2000, 15 : 293 - 296
[49] Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system
M. D. Klapkiv
Materials Science, 1999, 35 : 279 - 283
[50] RADIATING CAPACITY OF METAL-CERAMIC COATINGS
Patokin, A. P.
Khrebtov, V. L.
Shirokov, B. M.
PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2006, (04): : 172 - 174

← 1 2 3 4 5 →