Research on plastic flow behaviors for hole flanging part of aluminum alloy with large complicated profiles by electromagnetic forming

被引：5
|
作者：
Huang, Liang [1 ,2 ]
Luo, Wenyong [1 ,2 ]
Liu, Xianlong [1 ,2 ]
Li, Jianjun [1 ,2 ]
机构：
[1] State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
[2] College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2013年 / 49卷 / 24期
关键词：
Metal forming - Plastic flow - Electromagnetic fields - Aluminum alloys - Finite element method;
D O I：
10.3901/JME.2013.24.024
中图分类号：
学科分类号：
摘要：
Hole flanging part of aluminum alloy with large complicated profiles by electromagnetic forming is a complex metal forming process coupling electromagnetic field and constructive field. Due to the effects of large complicated profiles, plastic flow behaviors during the forming process are different from traditional flanging forming. A finite element model for hole flanging part of aluminum alloy with large complicated profiles by electromagnetic forming is established based on loose coupling simulation method, and then plastic flow behaviors on condition of one layer flat coil, two layers flat coil and three layer flat coil are investigated, and subsequently plastic flow rules of flange parts under different pressures are revealed by experiments. The results are as follows: Large complicated profiles are completed closed to female die surfaces on condition of three layer flat coil, flange parts are put into female die and plastic flow phenomenon is more obvious; flange parts are grown to different modes under different pressures, and obvious wrinkling phenomenon for flange parts appear when pressures are less; hole flanging part of aluminum alloy with large complicated profiles more closed to female die surfaces is obtained by controls of reasonable pressures. © 2013 Journal of Mechanical Engineering.
引用
收藏
页码：24 / 29
相关论文
共 21 条
  • [21] Optimum design of flow distribution in quenching tank for heat treatment of A357 aluminum alloy large complicated thin-wall workpieces by CFD simulation and ANN approach
    Yang, Xia-wei
    Zhu, Jing-chuan
    He, Dong
    Lai, Zhong-hong
    Nong, Zhi-sheng
    Liu, Yong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) : 1442 - 1451
123