Impact damage repair and performance of carbon fiber reinforced poly aryl ether ketone composites

被引：0

作者：

Gu Y. ^{[1
]}

Liu G. ^{[1
]}

Gao D. ^{[1
]}

Zhang D. ^{[2
,3
]}

Wang C. ^{[2
,3
]}

Yao J. ^{[1
]}

Yang S. ^{[1
]}

机构：

[1] State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai

[2] AECC Beijing Institute of Aeronautical Materials, Beijing

[3] National Key Laboratory of Advanced Composites, Beijing

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2024年 / 41卷 / 05期

关键词：

compression properties; hot pressing repair; low velocity impact; poly aryl ether ketone; thermoplastic composites;

D O I：

10.13801/j.cnki.fhclxb.20231010.001

中图分类号：

学科分类号：

摘要：

For the thermoplastic composites prepared by domestic T300 grade carbon fiber reinforced high performance poly aryl ether ketone resin prepreg (SCF35/PAEK-L), the impact damages generated by different impact energies were repaired by hot pressing process. The compressive strength was used to evaluate the repair effect of composite impact damage, and Micro-CT was utilized to study the microscopic morphology of composites before and after repair. The results show that the impact damage repair effect of the composite is affected by the hot pressing repair process, and the compression strength of the composite shows a trend of increasing and then decreasing as the repair temperature increases. The lower repair temperature and higher repair pressure are able to obtain similar compression strength with higher repair temperature and lower repair pressure. The repair effect of the composite material is influenced by the degree of impact damage, and the compressive strength of the composite material after repair gradually decreases as the degree of impact damage increases. The repaired compressive strength of the composites with standard energy impact recoveres to ~70% of the compression strength in the undamaged state, which is ~417 MPa, and when the composite material has penetration damage, its compressive strength after repair recovers to 56%, which is ~334 MPa. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：2333 / 2343

页数：10

共 30 条

[21] SLATTERY P G, MCCARTHY C T, O'HIGGINS R M., Assessment of residual strength of repaired solid laminate composite materials through mechanical testing, Composite Structures, 147, pp. 122-130, (2016)
[22] GU Yangyang, ZHANG Jindong, LIU Gang, Et al., Effect of melt viscosity and impact energy of poly aryl ether ketone (PAEK) resins on the impact damage behavior of their composites, Acta Materiae Compositae Sinica, 40, 10, pp. 5641-5653, (2023)
[23] GE T, ROBBINS M O, PERAHIA D, Et al., Healing of polymer interfaces: Interfacial dynamics, entanglements, and strength, Physical Review E, 90, 1, (2014)
[24] MANTELL S C, SPRINGER G S., Manufacturing process models for thermoplastic composites, Journal of Composite Materials, 26, 16, pp. 2348-2377, (1992)
[25] MIKOS A G, PEPPAS N A., Polymer chain entanglements and brittle fracture: 2. Autohesion of linear polymers, Polymer, 30, 1, pp. 84-91, (1989)
[26] AGEORGES C, YE L, HOU M., Advances in fusion bonding techniques for joining thermoplastic matrix composites: A review, Composites Part A: Applied Science and Manufacturing, 32, 6, pp. 839-857, (2001)
[27] Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event: ASTM D7136/D7136M− 20, (2020)
[28] Standard test method for compressive residual strength properties of damaged polymer matrix composite laminates: ASTM D7137/D7137M− 17, (2017)
[29] Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture: ASTM D6641/ D6641M− 14, (2014)
[30] KHAN T, IRFAN M S, CANTWELL W J, Et al., Crack healing in infusible thermoplastic composite laminates, Composites Part A: Applied Science and Manufacturing, 156, (2022)

← 1 2 3 →