Numerical and Experimental Study of an Industrial Case for Grain Size Evolution in Bainitic Steel in Controlled Hot Forging and its Influence on Mechanical Performance

被引：0
|
作者：
Ivaniski, T.M. [1 ]
de Castro, P.J. [1 ]
Rodrigues, D. [1 ]
Épp, J. [2 ,3 ]
Nunes, R.M. [1 ]
da Rocha, A.S. [1 ]
机构：
[1] Universidade Federal do Rio Grande do Sul, Departamento de Metalurgia, Centro de Tecnologia, Laboratório de Transformação Mecânica, RS, Porto Alegre, Brazil
[2] Leibniz-Institut für Werkstofforientierte Technologien, Bremen, Germany
[3] University of Bremen, MAPEX Centre for Materials and Processes, Bremen, Germany
来源：
Materials Research | 2022年 / 25卷
关键词：
34;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 34 条
  • [21] Three-dimensional Numerical Simulation and Experimental Analysis of Austenite Grain Growth Behavior in Hot Forging Processes of 300M Steel Large Components
    Luo, Jiao
    Liu, Ying-gang
    Li, Miao-quan
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (10) : 1012 - 1019
  • [22] Three-dimensional Numerical Simulation and Experimental Analysis of Austenite Grain Growth Behavior in Hot Forging Processes of 300M Steel Large Components
    Jiao LUO
    Ying-gang LIU
    Miao-quan LI
    Journal of Iron and Steel Research(International), 2016, 23 (10) : 1012 - 1019
  • [23] Three-dimensional Numerical Simulation and Experimental Analysis of Austenite Grain Growth Behavior in Hot Forging Processes of 300M Steel Large Components
    Jiao Luo
    Ying-gang Liu
    Miao-quan Li
    Journal of Iron and Steel Research International, 2016, 23 : 1012 - 1019
  • [24] Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study
    Antoine Geisler
    Morteza Sadeghifar
    Jean-Benoit Morin
    Abdelhalim Loucif
    Mohammad Jahazi
    International Journal of Material Forming, 2023, 16
  • [25] Void closure during open die forging of large size martensitic stainless-steel ingots: an experimental-analytical-numerical study
    Geisler, Antoine
    Sadeghifar, Morteza
    Morin, Jean-Benoit
    Loucif, Abdelhalim
    Jahazi, Mohammad
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2023, 16 (01)
  • [26] Evaluation of size effect on strain-controlled fatigue behavior of a quench and tempered rotor steel: Experimental and numerical study
    Zhu, Shun-Peng
    Foletti, Stefano
    Beretta, Stefano
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 735 : 423 - 435
  • [27] Numerical Study on the Mechanical Performance of a Flexible Arch Composite Bridge with Steel Truss Beams over Its Entire Lifespan
    Sun, Ning
    Zheng, Xiaobo
    Li, Yuan
    Zhao, Yunlei
    Yuan, Haoyun
    Zhou, Mi
    SUSTAINABILITY, 2024, 16 (14)
  • [28] STUDY ON RECRYSTALLIZATION AND GRAIN-GROWTH OF AUSTENITE DURING HOT-FORGING IN HEAVY FORGINGS .1. EFFECT OF DEFORMATION CONDITION ON AUSTENITE GRAIN-SIZE IN 3.5 NI CR MO V STEEL
    HORI, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S592 - S592
  • [29] Study on the Influence of Grain Size and Microstructure on the Mechanical Properties of Fe-6.5 wt%Si High Silicon Steel Prepared by CVD Method
    Ye, Dongdong
    Xu, Zhou
    Yin, Changdong
    Wu, Yiwen
    Chen, Jianjun
    Chen, Rui
    Pan, Jiabao
    Chen, Yajuan
    Li, Rui
    CRYSTALS, 2022, 12 (10)
  • [30] Performance of single-bolted laminated flattened-bamboo connection with steel plate under compression parallel to grain - An experimental and numerical study
    Yang, Dong
    Li, Haitao
    Hong, Chaokun
    Lorenzo, Rodolfo
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 401
1234