Ceramic molds with low-module water glass for investment casting

被引：0
|
作者：
Makarevich, A.P. [1 ]
Kocheshkov, A.S. [1 ]
Lyutyj, R.V. [1 ]
机构：
[1] NTU Ukrainy 'Kievskij Politekhnicheskij Inst.', Kiev, Ukraine
来源：
Litejnoe Proizvodstvo | 2005年 / 10期
关键词：
Aluminum compounds - Binders - Cast iron - Ceramic materials - Clay minerals - Fillers - Glass - Investment casting - Plastic deformation - Silicates - Steel;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An influence of the Al-containing materials on properties of the ceramic molds with the low-module water glass as a binder. The minerals such as kaolin clays and pyrophyllite are tested as the components of refractory suspensions. The thermal resistant ceramic molds are manufactured, calcined up to 1000°C and filled with different steels at 1580°C. It is revealed that pyrophyllite may be used as the ceramic mold filler. In this case, the plastic deformation of ceramic materials is absent at operation temperature shifted maximum to 900°C. This provides the geometrical preciseness of molds and castings.
引用
收藏
页码：20 / 22
相关论文
共 50 条
  • [1] Improvement of technological properties of ceramic molds for investment casting
    Parshukova, N.Y.
    Litejnoe Proizvodstvo, 2001, (10): : 18 - 19
  • [2] An overview of ceramic molds for investment casting of nickel superalloys
    Kanyo, Janos E.
    Schaffoner, Stefan
    Uwanyuze, R. Sharon
    Leary, Kaitlynn S.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (15) : 4955 - 4973
  • [3] Removing pattern compound from ceramic molds in investment casting by melting out in hot water
    Suslov, A.E.
    Zhukov, A.A.
    Serebryakov, S.P.
    Litejnoe Proizvodstvo, 2001, (11): : 13 - 17
  • [4] Porous molds for investment casting
    UkrNIIlitmash, Khar'kov, Ukraine
    Liteinoe Proizvod, 9 (21):
  • [5] Low Thermal Diffusivity Investment Casting Molds Using Cenospheres
    Xu, M.
    Lekakh, S.
    Richards, V.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 123, 2015, 123 : 145 - 150
  • [6] Near-Net-Shape Production of Ceramic Investment Casting Molds Using Stereolithography
    Layher M.
    Hopf A.
    Just D.
    Eckhardt L.
    Bliedtner J.
    Reichenbächer H.
    Antonow F.
    InterCeram: International Ceramic Review, 2022, 71 (04): : 24 - 29
  • [7] Rapid preparation of water glass binder for investment casting
    Nikiforov, S.A.
    Litejnoe Proizvodstvo, 2003, (10): : 25 - 26
  • [8] INFLUENCE OF CERAMIC MOLDS PARAMETERS ON THE QUALITY OF SMALL-SCALE CASTS PRODUCED BY THE INVESTMENT CASTING
    Dydak, Artur
    Kurdziel, Piotr
    Zaba, Krzysztof
    Puchlerska, Sandra
    Szwachta, Grzegorz
    METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 151 - 155
  • [9] Robotized unit for making investment casting molds
    Sokol, I.B.
    Belyaev, V.M.
    Pepelin, A.B.
    Litejnoe Proizvodstvo, 1997, (10): : 24 - 25
  • [10] Interaction Between Ceramic Molds and High-Speed Steel during Gravity and Vacuum Investment Casting
    Alexander S. Chaus
    Matej Bračík
    L’ubomír Čaplovič
    Journal of Materials Engineering and Performance, 2019, 28 : 4774 - 4789
12345