Production of Medical Titanium Alloys with a Reduced Modulus of Elasticity by Selective Laser Melting. Review

被引：0
|
作者：
Sokolova, V. V. [1 ]
Polozov, I. A. [1 ]
Popovich, A. A. [1 ]
机构：
[1] Peter Great St Petersburg Polytech Univ, St Petersburg, Russia
来源：
METAL SCIENCE AND HEAT TREATMENT | 2024年 / 66卷 / 5-6期
基金：
俄罗斯科学基金会;
关键词：
selective laser melting; titanium alloys; medical alloys; powder metallurgy; TI-NB-ZR; SHAPE-MEMORY; MECHANICAL-PROPERTIES; CORROSION-RESISTANCE; TANTALUM; STRENGTH; BEHAVIOR; MICROSTRUCTURE; PERFORMANCE; IMPLANTS;
D O I：
10.1007/s11041-024-01058-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Various systems of biocompatible alloys (mainly based on Ti - Nb and Ti - Ta systems), used for medical purposes, were considered. The specifics of the production of such alloys by selective laser melting have been analyzed. The potential of future use of additive technologies for the creation of high-quality, safe material using beta-titanium powder alloys for medical products with enhanced performance characteristics is discussed.
引用
收藏
页码：355 / 364
页数：10
相关论文
共 50 条
  • [31] Architectured heterogeneous alloys with selective laser melting
    Jeong, Sang Guk
    Karthik, Gangaraju Manogna
    Kim, Eun Seong
    Zargaran, Alireza
    Ahn, Soung Yeoul
    Sagong, Man Jae
    Kang, Suk Hoon
    Cho, Jung-Wook
    Kim, Hyoung Seop
    SCRIPTA MATERIALIA, 2022, 208
  • [32] Selective Laser Melting of Aluminum and Its Alloys
    Wang, Zhi
    Ummethala, Raghunandan
    Singh, Neera
    Tang, Shengyang
    Suryanarayana, Challapalli
    Eckert, Jurgen
    Prashanth, Konda Gokuldoss
    MATERIALS, 2020, 13 (20) : 1 - 67
  • [33] A review on microstructures and properties of high entropy alloys manufactured by selective laser melting
    Zhang, Chen
    Zhu, Junkai
    Zheng, Huai
    Li, Hui
    Liu, Sheng
    Cheng, Gary J.
    INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 2020, 2 (03)
  • [34] A review on microstructures and properties of high entropy alloys manufactured by selective laser melting
    Chen Zhang
    Junkai Zhu
    Huai Zheng
    Hui Li
    Sheng Liu
    Gary J Cheng
    International Journal of Extreme Manufacturing, 2020, 2 (03) : 67 - 87
  • [35] Numerical simulation for heat and mass transfer during selective laser melting of titanium alloys powder
    Li, Cheng-Jui
    Tsai, Tsung-Wen
    Tseng, Chien-Chou
    LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016, 2016, 83 : 1444 - 1449
  • [36] Research Status and Prospects of High-Strength Titanium Alloys Fabricated by Selective Laser Melting
    Ma, Yinfan
    Fan, Jiangkun
    Tang, Luyao
    Zhai, Haoyu
    Zhang, Zhixin
    Chen, Biao
    Jun, Wang
    Bin, Tang
    Kou, Hongchao
    Li, Jinshan
    RARE METAL MATERIALS AND ENGINEERING, 2025, 54 (01) : 280 - 292
  • [37] Mechanical performance of simple cubic architected titanium alloys fabricated via selective laser melting
    Liu, Yingang
    Zhang, Jingqi
    Tan, Qiyang
    Yin, Yu
    Li, Miaoquan
    Zhang, Ming-Xing
    OPTICS AND LASER TECHNOLOGY, 2021, 134
  • [38] Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys
    Jukka Pakkanen
    Flaviana Calignano
    Francesco Trevisan
    Massimo Lorusso
    Elisa Paola Ambrosio
    Diego Manfredi
    Paolo Fino
    Metallurgical and Materials Transactions A, 2016, 47 : 3837 - 3844
  • [39] Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys
    Pakkanen, Jukka
    Calignano, Flaviana
    Trevisan, Francesco
    Lorusso, Massimo
    Ambrosio, Elisa Paola
    Manfredi, Diego
    Fino, Paolo
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (08): : 3837 - 3844
  • [40] PRODUCTION OF ENGINEERING GREY IRON CASTINGS - A REVIEW, WITH PARTICULAR REFERENCE TO ELECTRIC MELTING.
    Guthrie, A.M.
    Wilford, C.F.
    Metallurgist and Materials Technologist, 1977, 9 (09): : 491 - 493
12345