Effect of microstructures on the fatigue behavior of V-added ferrite-pearlite type microalloyed steels

被引：0
|
作者：
Yaguchi, Hiroshi [1 ]
Tsuchida, Takehiro [1 ]
Matsushima, Yoshitake [1 ]
Abe, Satoshi [1 ]
Iwasaki, Katsuhiro [1 ]
Inada, Atsushi [1 ]
机构：
[1] Materials Research Laboratory, Technical Development Group, Kobe Steel, Ltd., Kobe, Japan
来源：
KOBELCO Technology Review | 2002年 / 25期
关键词：
Alloying - Fatigue of materials - Ferrite - Metallographic microstructure - Pearlite - Volume fraction;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of microstructures on the fatigue behavior of V-added ferrite-pearlite type microalloyed steels was studied. It was found that fatigue cracks initiated from ferrite, and that crack initiation life had a great influence on fatigue limit. These results have indicated that the fatigue limit ratio could be improved by maximizing ferrite strength and optimizing ferrite volume fraction.
引用
收藏
页码：49 / 53
相关论文
共 50 条
  • [31] In-situ investigation on the fatigue crack propagation behavior in ferrite-pearlite and dual-phase ferrite-bainite low carbon steels
    Guan MingFei
    Yu Hao
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2013, 56 (01) : 71 - 79
  • [32] Prediction of strengthening due to V additions in direct-cooled ferrite-pearlite forging steels
    Purtscher, PT
    Cheng, Y
    Kuziak, R
    Foley, RP
    37TH MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, 1996, 33 : 405 - 416
  • [33] In-situ investigation on the fatigue crack propagation behavior in ferrite-pearlite and dual-phase ferrite-bainite low carbon steels
    MingFei Guan
    Hao Yu
    Science China Technological Sciences, 2013, 56 : 71 - 79
  • [34] Effect of spheroidization on the near-threshold fatigue crack growth in ferrite-pearlite steel
    Kim, ES
    Kim, IS
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (05) : 367 - 369
  • [35] The influence of pearlite fraction on the shock properties of ferrite-pearlite steel microstructures: Insight into the effect of second-phase particles
    Euser, V. K.
    Martinez, D. T.
    Valdez, J. A.
    Trujillo, C. P.
    Cady, C. M.
    Jones, D. R.
    Fensin, S. J.
    JOURNAL OF APPLIED PHYSICS, 2022, 131 (11)
  • [36] LOW-CYCLE FATIGUE OF DUAL PHASE STEELS PRODUCED BY DIFFERENT COOLING RATES AND A FERRITE-PEARLITE STEEL
    MEDIRATTA, SR
    RAMASWAMY, V
    SINGH, V
    RAO, PR
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (04): : 793 - 797
  • [37] Effect of cutting parameters on cutting force and surface roughness during machining microalloyed steel: Comparison between ferrite-pearlite, tempered martensite and ferrite-bainite-martensite microstructures
    Sivaraman, V.
    Sankaran, S.
    Vijayaraghavan, L.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (01) : 141 - 150
  • [38] Dynamic Flow Stress Behavior of Hypo-Eutectoid Ferrite-Pearlite Steels Under Rapid Heating
    S. P. Mates
    E. Vax
    R. R. Rhorer
    M. R. Stoudt
    Journal of Dynamic Behavior of Materials, 2020, 6 : 246 - 265
  • [39] Quantitative analysis of precipitation behavior in ferrite of V added microalloyed steel
    Kang, HC
    Lee, SH
    Shin, DH
    Lee, KJ
    Kim, SJ
    Lee, KS
    DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 49 - 52
  • [40] Microstructure based modeling for the mechanical behavior of ferrite-pearlite steels suitable to capture isotropic and kinematic hardening
    Allain, S.
    Bouaziz, O.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2): : 329 - 336
12345